Scenario: 2 Vlans on a L3 3560
In VLAN1 I have the devices pointing to the L3 switch itself and they can communicate w/ devices on VLAN10 and get to the net.
In VLAN10 I have the devices pointing to VLAN10 itself and they, too, can communicate w/ devices on VLAN1, but they cannot get the net.
Why is that?
Here is my configuration thus far:
192.168.1.15 = Router
192.168.1.7 = L3 switch
192.168.10.1 = Vlan 10 Id
192.168.1.1 = DHCP Server
User Access Verification
Gateway of last resort is 192.168.1.15 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.1.15
C 192.168.10.0/23 is directly connected, Vlan10
C 192.168.0.0/23 is directly connected, Vlan1
Cisco_POE#
Current configuration : 2227 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Cisco_POE
!
ip subnet-zero
ip routing
!
ip dhcp snooping vlan 1-10
ip dhcp snooping
!
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
!
!
!
!
interface FastEthernet0/1
ip dhcp snooping trust
!
interface FastEthernet0/2
ip dhcp snooping trust
!
interface FastEthernet0/3
ip dhcp snooping trust
!
interface FastEthernet0/4
ip dhcp snooping trust
!
interface FastEthernet0/5
ip dhcp snooping trust
!
interface FastEthernet0/6
ip dhcp snooping trust
!
interface FastEthernet0/7
ip dhcp snooping trust
!
interface FastEthernet0/8
ip dhcp snooping trust
!
interface FastEthernet0/9
ip dhcp snooping trust
!
interface FastEthernet0/10
ip dhcp snooping trust
!
interface FastEthernet0/11
ip dhcp snooping trust
!
interface FastEthernet0/12
ip dhcp snooping trust
!
interface FastEthernet0/13
ip dhcp snooping trust
!
interface FastEthernet0/14
ip dhcp snooping trust
!
interface FastEthernet0/15
ip dhcp snooping trust
!
interface FastEthernet0/16
ip dhcp snooping trust
!
interface FastEthernet0/17
ip dhcp snooping trust
!
interface FastEthernet0/18
ip dhcp snooping trust
!
interface FastEthernet0/19
ip dhcp snooping trust
!
interface FastEthernet0/20
ip dhcp snooping trust
!
interface FastEthernet0/21
ip dhcp snooping trust
!
interface FastEthernet0/22
description port on VLAN10
switchport access vlan 10
switchport mode access
ip dhcp snooping trust
!
interface FastEthernet0/23
ip dhcp snooping trust
!
interface FastEthernet0/24
ip dhcp snooping trust
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 192.168.1.7 255.255.254.0
!
interface Vlan10
ip address 192.168.10.1 255.255.254.0
ip helper-address 192.168.1.1
!
router rip
version 2
network 192.168.1.0
network 192.168.10.0
!
ip classless
ip default-network 192.168.1.0
ip route 0.0.0.0 0.0.0.0 192.168.1.15
ip http server
!
!
control-plane
!
!
end
It says 192.168.0.0 directly connected Vlan 1, but shouldn’t it be 192.168.1.0 since it’s the .1 subnet?
Please help!