Discussion Locked

Where is my ip on the internet

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to be able to find my own ip over the internet. and/or to be able to connect to it once I know where it is.

I am using a dsl router (dlink504) with the defaults such as dns with 192.168.0.1 the address From there I have statically assigned computers ip's in the 192.168.0 range connected straight into it, I'm using windows as the os.

16 replies

by hsadry

open start menu then click run.
type "command" in the box(without qouts) and press enter.
type ipconfig and press enter.
now you can see your IP address.
if your security permits you can connect to your IP by typing it in the address bar of internet explorer.

by bfilmfan

You will need to discover first if you router is being assigned a static or DHCP-assigned address by the ISP.

What is my IP http://www.whatismyip.com/ can tell you the address that is showing as your public IP address that is broadcast to the Internet.

Note that your ISP may have you behind a firewall to protect you. A quick phone call to your ISP technical support can verify if you have a static IP address and if you are behind a firewall.

by tomsal

A few options,

1) You can install utility software that constantly tells you your public IP address. There is a program called "MyWanIP", we install it on all the remote computers we administer so when we ask them their IP they know what it is without being "computer geeks". Just do a search for it at a popular software site like downloads.com

2) You can find out the IP address you have assigned from the commmand prompt...

Go to the command prompt (click "start", then "run" and type cmd, click "ok"). At the prompt type ipconfig (for a brief list of information) OR type ipconfig /all if you want a detailed list of information on your ip.

3) You can call your ISP to find out, but this isn't really practical unless you have issues with your connect like it keeps dropping or as another poster stated you want to know if its static or dynamic.

Rest assured however unless you pay extra money for your connection chances are great its a dynamic address.

by dustyd

In addition to the above, configure port-forwarding on your router, port 3389 to the IP address of the system you want to connect to. Password must be in use on your user account to use Remote Desktop as well as XP on the connectTO system. You are already on the right track by using static IP's on clients. Note that you will only be able to connect to one system this way.
Enable Remote Desktop in System properties.

Another way to discover your IP address at home from afar is FollowMeIP, found at followmeip.org

by mdlnet

Your global IP is the wan address of your router, go into the router configuration and look at your WAN address which is your global IP, the address that you can see from the internet is your routers WAN ip, not the one asigned to your computer by your router or DHCP server, this is an internal address and it cannot be viewed from the internet, if you whant to access your pc from the internet you need to forward the specific ports you are going to use to your computers IP.
good luck!

by mdlnet

if your router is configured to obtain global IP automatically, go to status in the router configuration, there you should be able to see your WAN IP!

by tomsal

" want to be able to find my own ip over the internet. and/or to be able to connect to it once I know where it is.

I am using a dsl router (dlink504) with the defaults such as dns with 192.168.0.1 the address From there I have statically assigned computers ip's in the 192.168.0 range connected straight into it, I'm using windows as the os. "

>>Sorry I couldn't add a comment for some reason.

You provide no info on your OS other than its windows (what version?), your lan environment (saying you have router isn't enough).

If you have Windows XP, and you are talking about a home network - when properly configured through a DSL/Cable router -- you certainly can find out your WAN ip through cmd then ipconfig/all -- I know I do this all the time at home to find my own and I have XP and a cable router set up.

You simply asked how to find your IP when connected to the Internet, WANIP will do that if you want an easy utility, so will numerous sites on the 'net like whatismyip.com, so will looking into your router itself! (if you are comfortable and familiar with working with the admin interface).

Either way, feedback would be nice on how you finally solve your issue.

Hope this helps.

by tomsal

Note that most ISP's (unless you specifically pay them more for a static address) supply you dynamic IP's...they sometime may seem static but that's because the lease is long.

by maniskid

What I want to do is to be able to connect to computers in a WAN environment. At present I am working with a version of win2k3server standard(think xp). I also have another xp computer on the router.

The lan configuration is basically plug everything into the dsl router and set the default gateway to it. It has a dns, and its a switch. I've enabled as much as I can to try and get this working.

I have recently tried to 'remote desktop connection' the other computer by specifying the routers' internet address and port redirecting 3389 to its ip. using a tcp port. I didn't get a connection.

main computer 192.168.0.1
other computer 192.168.0.10
internet address 203.59.15.85

NB The reason I havent got back to this question in a while is because I loaded the 'remote desktops' utility and tried to loop back the desktop to the very same server through the internet. The operating system died right there and then and despite my best efforts I had to reinstall everything. (I think a screen driver had something to do with it though, its been removed)

This discussion is closed to new replies.