Question Locked

Win XP/MS VPN client (PPTP) can't access resoure in My Network Places

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi Guru's,

I have a Win XP client w/sp3. It connects to the internet via wireless. The firewall in use is Checkpoint NGX.

I can connect to a remote location (Small Business Server 2003 R2) domain via MS VPN client (PPTP). When I search for the (NetBIOS) computers on the local network...I get nothing can be located. From the Win XP wireless client (command prompt), I can ping and run tracert successfully using the static IP addresses (external and internal/NAT)for the DC, Fortigate router, Netopia 3347 wireless router, the network printer(s).

I can telnet to port 1723, 4125, etc. from the Win XP wireless client. I made sure that GRE 47 is enabled on the Checkpoint (client location) firewall and the Fortigate router/firewall (DC location. When I connect to the domain controller (SBS 2003 Server) location and search for computer on the local network...I get NOTHING. The SBS server RASS shows to client connected.

The client VPN configuration = PPTP, Use Default Gateway, Register DNS Suffix and I added WINS IP address. The client IP address is being fetched from the local DHCP (72.X.X.X) IP config shows IP info. = DNS, Gateway, etc. all being from 72.X.X.X network. The network where the SBS Server = 192.168.1.X. The same network address for the Netopia, Fortigate, server, etc.

For the LOVE of GOD...I can not figure this one out. Is the problem with the Checkpoint firewall? I used my Linksys wireless router (at home) to connect my laptop and Desktop PC (exact replica (OS) of the Win XP wireless client, had absolutely NO PROBLEMS AT ALL accessing ALL of the resources at the SBS 2003 environment.

I went next door to Star buck w/laptop and connected to AT&T wireless and had absolutely NO PROBLEMS. When I got to the location where the Win XP client...I can connect to SBS 2003 but can't see ANYTHING in My Network Places...the same is true when I hook my laptop (the same one I used at home and at Star Bucks / AT&T wireless) at the location where the Checkpoint firewall / Win XP SP3 client is located.

WOW!! Cant' figure out what I am doing wrong...if any. I think it must be the Checkpoint firewall...What do you think.

Thanks a MILLION!!!!

2 replies

by robo_dev

PPTP Enforcement.
Make sure outbound traffic rule that the client matches for the VPN connectivity has the specific PPTP service group (NOT the "any" service). In addition, make sure the PPTP-tcp service (the one inside the PPTP group) has the Advanced property of Protocol Type set to PPTP_TCP. (swiped from some CheckPoint discussion)

Next, try setting your XP box to use TCP for kerberos. By default Windows authentication uses UDP, which does not play well with VPN.
http://support.microsoft.com/kb/244474

A sniffer, such as WireShark, would show you if SMB authentication is failing, or if ports 137-139 & 445 are being blocked.

It could indirectly be a MTU issue, because fragmented udp kerberos authentication packets will block windows authentication.

Next I would try using the nbtstat command to see if you can really see the right protocols at all.... nbstat -R nbtstat -r.

If it's just a DNS issue, you can add some LMHOSTS entries to force netbios to behave.

This discussion is closed to new replies.