Question Locked

Win2K domain to 2003 domain with new DC and 2007 exchange.

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I currently have 4 2K DC's in my domain, one of them is a 2K exchange(enterprise) on a DC. I would like to bring in a new 03 DC and a new 03 member server(exchange 07)and move all my mail boxes from the DC exchange box to the new exchange 07 box.

Can I do this, and in what order could I do things? KB325379 has alot of info but it refers to exch 03 and its still a bit over my mental capacity...

Would I run the 07 forestprep, then the adprep, then promote the first new 03 DC into the domain? After that install the new member server exch 07 and move mailboxes at my leisure? Its obvious how terrified I am of all this... If anyone would like to chime in or share some experience with me via email it would be appreciated.

8 replies

by bart777

Go to one of your current DCs and run the ADPREP from there using the 2k3 disk. This will get you to the current AD schema level. (Note: if this is going to be R2 you will need to use the ADPREP on disk2)

Once you do that then you can setup the exchange server. It will run it's own ADPREP but this is for the Exchange schema. This is seperate from the AD upgrade.

It just seems a bit overwhelming but really not that bad. Just take it one step at a time.

On a personal note I would put Exchange on it's own box seperate from the DC. If you ever had to do a DCPROMO on the exchange box you will be spending hours on the phone with Microsoft trying to repair the Metabase.

If you ahve any problems just pop back in here and we'll help you.

Best of luck

by bross

I am setting up the mail server as a member server on a new box and both of my last two exchanges servers have been on DC's which leads me to my next question. Do I need a AD connecter for the new exchange server if it is not on a DC?

by bart777

You can do all of the user AD work from the exchange server even if it's not a DC. Exchange installs ADUC as part of the install.

You would want to install the tools onto the DC if you want to have the mailbox control functions on the DC. That's all you need.

by bross

I am going to get a system state backup and would like to start this project friday morning. I plan on doing this during business hours. Do you see any problem with doing the ADprep while we are in full swing?

by bart777

There may be a short lag in logins while you are updating the schema but that would be all I would expect to see.

Best of luck.

by cg it

because Exchange 2007 only works with 64 bit word processors.

Here's the system requirements for Exchange 2007. Note its recommended that you run a 64 bit AD architecture with Exchange 2007.

http://technet.microsoft.com/en-us/library/aa996719.aspx

Added: you can introduce W2003 Servers into a W2K network environment provided that you run addprep/forestprep and addprep/domain prep on the W2K machines so that the schema on W2K is compatible with W2003. From there, it's just a matter of AD replication between DCs.

For Exchange, I would have both on the network and follow MSs advice on the co-existence of Exchange 2007 with other Exchange Servers.

see this Technet article:

http://technet.microsoft.com/en-us/library/aa998186.aspx?wt.svl=upgrademigrate

by bross

Been a while since I have done this. The command line info is point blank but I need to be sure. Logging into my schama master I will run ADPREP / Forestprep then /domainprep and then / gpprep. After that I can promo the new server.

Im hoping my exchange server doesnt have a problem with all of this. I wont be able to bring the new exchange in for a couple days and move mailboxes, does this all sound good?

I am ready to do this.

This discussion is closed to new replies.