Discussion Locked

Windows XP SP2 vs Novell Client 4.83

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Using Novell Netware 4.83 client and Windows XP SP2 (OEM) operating system on an HP dc7100 computer. Unable to log in to the network with Limited account type. No apparent error message. The Novell "busy" icon just continues. The only way to clear it is the "End Task" via "CNTRL-ALT-DEL" keybord combination. Changing the account type to Administrator and using the same user account, no problem logging in to the network. What gives?

22 replies

by curacao_dejavu

remove the novell client.
verify that you can login normally with a limited user.
(and check the eventviewer for warnings or error messages)
Then download and install the newest novell client (i believe 4.9x) as an administrator.
verify that you can login normally with an administrator user.
(and check the eventviewer for warnings or error messages)
login as a limited user again.

Leopold

by s0y1

I had a similar issue as you. I found that if I logon as an administrator and edit the registry to change the MTU. You can modify the registry keys if you go to

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\

If you do not see a setting for "MTU" you can add it:

"MTU"=dword:000005dc

I changed my to the ethernet standard which is 1500.

I hope this helps.

by rboyer

Service pack 2 for WinXP causes all kinds of havoc, unless you apply third party patches. Novell client 4.9 will fix a lot of the problems. Login with the Workstation Only box checked and then install the Novell 4.9 client.

by itinstructor

What is the status of the Firewall in SP2. The firewall will create issues. I have had that take several clients off the network.

This discussion is closed to new replies.