My network in a oldest building
Wireless connection to LTs keep dropping out, then needs resetting – frustrating – NW is secure 128-bit and works brilliantly except for this issue. help
Network Consists of:-
1xServer Win 2003, Exchange Mail Server, DNS Server, Intranet Server, and File Server.
SU1 x.x.x.10
4xWorkstations (Wired & Wireless Connections available), but mainly wired used
WS1 x.x.x.40 (Wired)
WS2 x.x.x.42 (Wired)
WS3 x.x.x.44 (Wired)
WS4 x.x.x.46 (Wired{NotUsed}), 47(Wireless)
4xLaptops (Wired or Wireless connection available), but mainly wireless is to be used
LT1 x.x.x.30 (Wired), 31(Wireless{NormUsed})
LT2 x.x.x.32 (Wired), 33(Wireless{NormUsed})
LT3 x.x.x.34 (Wired), 35(Wireless{NormUsed})
LT4 x.x.x.36 (Wired), 37(Wireless{NormUsed})
1xNetgear DG814 4-port Router DSL/Modem Connects network to internet, DHCP Server
2xBelkin Wireless Routers
2xD-link Wireless Access Points
1xPrinter Server 3-Port LPT Type Network RJ45 Connection
1×4-port hub (Serves 2 Workstations)
Internet
1xNetgear DG814 Router(x.x.x.1) Cellar
1xBelkin Wireless Router(x.x.x.2)wired in Cellar
1xBelkin Wireless Router(x.x.x.3)wired Cellar
1xD-Link Wireless Access Point(x.x.x.4) Wireless in Kitchen(Ground Floor)
1 x D-Link Wireless Access Point(x.x.x.4) Wired 0n Landing (Second Floor)
From the netgear DG814
P1-Workstation(x.x.x.40)
P2-Belkin Wireless Router 2 Cellar(x.x.x.3)acting as hub to printer and print server and access point booster
P3-Top Landing 2nd floor Access Point – Serving WS4 and LT3
P4-Belkin Wireless Router 1 Cellar(x.x.x.2)serving 4-Port Hub front Cellar office and LTs
From Belkin Wireless Router 1 Cellar(x.x.x.2)
P1-4-port hub connecting to workstations (x.x.x.41&42, sometimes Laptop wired access x.x.x.30,33or35) both with shared printers.
P2-NotUsed
P3-Netgear Patch
WLAN/Internet-NotUsed
can any one sugest why this might be the case and can it be configured better…