I am not sure I have my dwl-2100ap’s ap mode set up
right. This works but the computers forget were the other networks are. All computers are on the same subnet with static ip address.
building 3 building 4
dwl-2100ap ptp dwl-2100ap ptp
switch with 6 computers switch with 4 computers
\ /
\ /
building 2 buildings 1,3,4 do not have a line of site
dwl-2100ap ptmp
no connections (repeater site)
|
|
building 1
dwl-2100ap ptp
hp switch 15 computers
& dlink dfl-300 firewall
internet connection
Would you please recommend the proper ap modes.
Randy
randy@globebus.com