Discussion Locked

A BAD KEYBOARD PORT ON MY MOTHERBOARD

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I use a TX PRO II P233 MMX motherboard. now, the keyboard port on board is damaged and i can't use a keyboard any longer. is there any way i can use any other keyboard on this board again?e.g a USB keyboard. the keyboard port on board is a serial port.

Thanks.

4 replies

by justanadmin

As long as you have USB ports on the board, you should have no problem plugging in a USB keyboard. I had to do this on one of my older systems as well.

Depending on the OS version, you may/may not have to load drivers. More than likely, the system will autodetect it and away you go!

Good luck.

by timwalsh

You should be able to use a USB keyboard, assuming: your BIOS supports USB, your Operating system supports USB, and you have an available USB port or can install a USB card.

by thechas

A USB keyboard WILL not work with most versions of Windows 95 or Windows NT.

If you are running a newer version of Windows, it should work.

If a USB keyboard does not work, you will need to replace the motherboard.
There are no other keyboardoptions.

I have seen used PII systems for under $50 on a regular basis.

Chas

This discussion is closed to new replies.