Question Locked

1022 Printer not working in Windows Vista

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have HP 1022 Printer recently i have install windows vista but 1022 printer driver not support windows vista & HP also not providing windows vista driver for hp 1022 now what can i do for that. please tell me...

8 replies

by cg it

it's one of the reasons many won't go to Vista. Unless HP makes drivers specifically for Vista, it won't work and you'll have to buy a Vista capable printer.

by akierzkiewicz

I tried installing the included driver for the HP LASERJET 1015 (included on vista) and although the test page comes out a bit garbled everything else seems to be working fine

by keresztes.kristof

I have a working temporary solution: you could use the built-in HP Laserjet Family Driver PCL5 x64 driver. Do not forget to do some custom setting (on genral tab -> printer preferences -> advanced):
Graphic: Truetype font: download as softfont
and
Document Options: Printer Optimalizations: Disabled
This is trick. :)
We have to wait for a working HP driver to share the printer. :(

by jj49er

If you are using a USB cable for your printer, disconnect it. Add a new printer from the control panel. Use LPT1 as your port connection. Pick an hp driver from the list. You may have to do this several times to find on that works. I would start by trying the driver for the DeskJet 970C. After you have set it up right click on the printer and choose 'properties'. There you can change the port back to USB. Most drivers will work for your printer, but some are better than others. HP has a compatibility chart on its web site, but it is not very accurate.

by bijaya_prakash

Friends, 1022 Printer working on windows vista i have done a lot of work in this. driver is avalable in HP site. but this driver is not working while shere the printer in that case XP driver is working fine

This discussion is closed to new replies.