Question Locked

1GB RAM upgrade made 256MB obsolete

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I installed 1GB Kingston DDR400 Ram into my A-bit AV8 3rd eye Motherboard which originally had 2 X 256MB Gel DDr400 RAM. After the upgrade one of the 256MB sticks of RAM would not be detected by Windows and I can only now use 1.25GB of my physically install 1.5GB

A friend suggested that maybe it has something to do with double sided and single sided RAM sticks (which i have no idea what it is)

My Motherboard supports Dual channelling and my physical layout is:

Channel 1: Slot 1 / Slot 2
Channel 2: Slot 3 / Slot 4

Slot 1 = 256MB
Slot 2 = 256MB
Slot 3 = 1GB
Slot 4 = Empty

Thanks oh so much, I've doubled Google's revenue today and gave myself a headache

My Specs:
---Main---
Mobo: A-bit AV8-3rd eye
PSU: Gigabyte 460W w/noise killer
RAM: 2X Gel 256MB DDR400
HDD: Seagate Barracuda 7200rpm 80GB 2MB buffer
Seagate Barracuda 7200rpm 160GB 8Mb buffer
OS: MS Windows XP Pro w/SP2
CPU: AMD 64 Athlon
BIOS: Phoenix AwardBIOS v6

---Visual---
Gfx: Nvidia GeForce 6600 GT w/ 128MB
Mon: 17" Polyview LCD

---Sound---
S.card: Creative Sound Blaster Live
Speakr: 5.1 Sound Blaster

---Network---
* Via Velocity Giga-bit Ethernet
* 2Wire 2701-A

---Other---
* Floppy Drive
* DVD+- burner (Pioneer)
* DVD+- Burner (JustLink)

7 replies

by computercookie

what you originally had was 2 x 256 MB RAM running at dual channel.

Check your bios or replace the 2 x 256 MB RAM with 1GB RAM.

by shady108

are you sure your motherboard can address that much ram?? just a question i think it probably can and should...

you can try a bios update, but yes dual channel needs the same size in each

by tintoman

Your mobo supports 2Gb RAM on a single channel or 8Gb on dual channels.
You have spanned 2 channels with your ram configuration but your RAM modules are not equal value

by pl312

Hmmm,

I re-tried a new configuration:

Slot 1 = Empty
Slot 2 = 256MB
Slot 3 = 1GB
Slot 4 = 256MB

Now my computer only detects 1GB.

How should I have physical layout? It should be possible to use all sticks of RAM but if 2 X 256MB are in the same channel only half of it is used. If i brought another 3 X 1GB sticks and placed them all in to make 4GB in total do you think it would be detected and usable?

Thanks again

EDIT: I updated my Bios not long ago and it is fairly current version. When i go into the BIOS what settings am I looking for?

by scifilover

Windows XP SP2 can only utilize a max of 3GB, so 4GB won't do you any good. You're better off buying one more of the 1GB sticks to match the other 1GB stick, for a total of 2GB. After that, you can try to see if the 256's are seen (whole).

by pl312

Thank you all, this is my first post and you have made it pleasant :)

This discussion is closed to new replies.