2 replies
by bubbaglock Accepted solution
by itmanagement Accepted solution
Not sure about the transmission errors but here is how you could achieve what you want to:
Give the crossover NIC a static IP address and subnet mask. Do not set a default gateway on this NIC on either the server or the client.
Create an entry in the hosts file (C:\Windows\System32\drivers\etc\hosts) called MYSERVERNAME and type the crossover NIC ip address into it. It will resolve this first before going to DNS.
Do the same on the server.
Then on each machine, create a route to allow the machine to send traffic to it's partner over the crossover link.
Command for this would be:
route add 10.0.0.1 (Server IP) Mask 255.255.255.255 10.0.0.2 (Client IP) metric 1 -p
What we're saying here is (on the client) to get to 10.0.0.1, which is the server crossover NIC's IP in this example, go through 10.0.0.2 which is the Client's crossover NIC ip address. The -p means make it persistent so it's there after reboot.
Let me know how you get on.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending