Question Locked

2003 server/XP pro networking

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello. I have a small workgroup with 9 XP pro machines and one 2003 server. The problem I'm having is that one computer (station 9) is only able to see one other computer on the network (station 7). I can ping all the others, and I can reach station 9 from all the others, but from station 9 I cannot browse to the other computers, and the search feature on XP does not find any computer except for 7. Any suggestions?

Thanks.

3 replies

by nimmo

Off topic a little I would personally promote that server to a domain controller and then join all the PC's, I feel that having 10 or more PC's is enough to justify the implementation of a domain controller, as you have 9 and one server you may as well go ahead and do it.

If you want to leave it as a workgroup start with making sure that the station is in the same workgroup and also check the firewall settings on the machine.

Check the IP settings on the card and compare it to another machine, to make sure the ip/subnet/dns and default gateway settings are correct.

To check the settings go to: start>run>cmd>ipconfig /all, if the settings are incorrect run ipconfig /release and the ipconfig /renew commands to refresh the address. You may also want to use the ipconfig /flushdns command to empty the dns cache

by kjell_andorsen

Nimmo offers some great suggestions, and I for one definitly agree that it might be worth upgrading this workgroup to a domain.

In additition to the suggestions offered I would also advise to check the computer in question and make sure there computer Browser service is running. There are some known issues where this service stops unexpectedly or refuses to start. This will make it impossible for that computer to browse for other systems on the network.

This discussion is closed to new replies.