8 replies
by sgt_shultz
do you happen to have your ram check at boot disabled (fast boot on?). turn it on.
reseat the ram modules. if you have done this already, i vote for bad ram module. can you try taking one out and running with one. see how it goes. then take out that one and run with the other. put marker dot on one so you can tell them apart.
by pcalla1
Poster rated this answer.
by jimmy
You say when you unbanked and then rebanked the RAM that when the PC rebooted it said CMOS error and then showed "512k RAM".
How exactly are you checking the RAM. Could you right-click My Computer and let us know what it says in there?
Running a DVD takes a huge amount of system reources.
Sounds Like you got a bad stick off RAM or dodgy CMOS battery from your description sounds more like a dodgy stick of RAM but only time will tell.
Try running the PC with only 256MB RAM and see what happens.
Then take that stick out and use the other again for a day.
Could be that the applications which are using a lot of RAM are finding the stick out. E,G. you DVD SW.
Another thing to do is let us know if you have added any RAM tot he PC.
May be incompatible modules.
by pcalla1
Poster rated this answer.
by csmith
Surprise!
About 60% of the time this problem is the battery on the motherboard.
This can also be something shorting the battry contacts(Looose screw, etc.). (Not too common)
This is not a OS problem.
It is hardware.
The CMOS can not retain the RAM setting.
Again, check the battery first.
This can also be a problem caused by dirt, but usually only in a very humid environment.
Do you live in the tropics? Gulf Coast? Florida?
The RAM being just barely warm to the touch is normal.
Actual RAM failures are not normally intermittent.
The other problem can be lack of airflow, but that usually shows up first as strange behavior by the CPU.
Regards, Chris
by pcalla1
Poster rated this answer.
by pcalla1
by pcalla1
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending