Discussion Locked

98SE vs Windows 2000 to prevent freezes

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We use a NT based application program linked to another company via a T1. We have our people working on 98SE with 64K mem and seem to have alot of freezes. Should we consider purchasing another 64K mem or change our OS over to Windows 2000 for morecompatibility? Our link to another company on a different T1 do not experience the freezes, but they also use an older version of the application than the first group I mentioned.

5 replies

by colglazier.sa

Linda,

Your questions leaves a lot of open questions about how you link, what routing equipment, and the type of application you are using. Without that type of info, I can only give you a general suggestion. My personal experience with Win2000Professional has been a very good one. I have experienced no locking, and not having to reboot after every new application install is a huge time saver. Not to mention the additional securitry it provides. You will want to first make sure your app will run on 2000. Not all 98 stuff does. You will probably also want to upgrade your ram to 128 as well.

Scott.

by kurt g

I agree with the previous post 100%. In addition, I'd like to add that the problems you are experiencing are most likely NOT due to insufficient RAM. I would start with looking for an update or patch for the app causing the problems. You might find a section devoted to Frequently Asked Questions on the App manufacturer's website.
Additionally, you may want to call the folks hosting your T1 and ask them to do a quick line check. It is possible that intermittent signal degradation or interruptions are causing the freezes.

Good luck,
Kurt G.

This discussion is closed to new replies.