Discussion Locked

A La Mode Slow to Respond over LAN

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client that is running an application that takes 4 minutes to open over a network connection. There are 8 machines total running W2K Pro each and the Wintotal 2000 software is being hosted on a P4 1.4GHz, 256MB RAM, 40GB HDD PC. On the server the application runs like a champ with absolutely no hesitation but on the network it's a different story. I've tried swapping both the NIC's and the Hub. I've updated the software as instructed by their tech support. Their tech support says that it has something to do with my clients network. I've even tried running both TCP/IP and NetBeui to no avail--same results. Everything else seems to run fine, data files for Wordperfect open and close up quickly. Ping is under 10ms, even with a packetsize of 65500. I tried hooking the server to a standalone workstation both with new NIC's--thinking that maybe there could be a bad wire slowing things down--I got the same results again.

Any help or suggestions would be greatly appreciated. I have definitely gotten stumped on this one.

2 replies

by ferocious

Is the server w2k or NT? How many protocols are you running on the clients? Try running only one. You have 8 client PCs. Try just using TCP/IP or NetBeui. Problem with NetBeui is you can't use it for internet access. Check the binding order in the protocol services and move one of them to the topmost level on all workstations. Check the server performance and see if optimization is set for applications.

by mar3166

The server is W2K Pro. The application can be shared out from a dedicated machine. (BTW-no one uses this machine). I tried both protocols and yes, I agree with Netbeui not being able to use the Internet. I'll have to check the binding order and server performance.

One thing that I failed to mention before was that when the application was initialized, all of the machines became real chatty. When checking the status button there was literally a mirror image of the number of bytes sent and received.

Once again any suggestions are welcomed.

This discussion is closed to new replies.