Discussion Locked

A small network for the home

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have a dell latitude laptop. With a network adapter card. When I'm at work I plug in my rj45 cable to get on the network. What I would like to do for my home and currently have at my home is the following: I have cable modem going to a desktop computer. I would like to make a small wireless network for my home. I'm not sure how to go about this. I would like to add a wireless network card to my latitiude keeping the other network card in there for work. And I know I would have to change my desktop to a wireless card and I would have to also buy a access point.
In theory I think I've thought some of this out but I know I'm missing some things. Any help would be appreciated.

5 replies

by jschein

ok, first of all, not much really for you to do or spend.

You can buy a complete wireless kit for 100-200 dollars.

The wireless router usually has a RJ45 cable for straight connect to a main desktop pc, so a wireless card for the desktop is not required.

As for the laptop with it's own network card... If you buy the kit, it will come with a laptop wireless nic... just unplug the work one, and plug yours in... following the products instructions.

When you are done or heading to work, plug your work nic back into the laptop. It will save the settings for that card and will not have to be re-programmed.

Good luck

by bbahar

Few suggestions :
(1) If your desktop doesn't have a network
card, buy one. It will cost you 25-35 $
maybe less.
(2) Buy a long cross patch cable and connect
between your laptop and desktop. Cheapest
and most reliable way to do home network. I
did it at home. Works great ..

Good Luck !

by 2hoc

Hi,
I thought I would put in my 2 cents worth. If you are sure that you want to go wireless, I would suggest that you get a wireless router instead of a access point. The router will typically have 3 or 4 RJ45 ports. You would use one of these ports to hookup your desktop computer. You would use a wireless card for your laptop.

Be sure to impliment the WEP (Wired Equivalent Privacy) encryption feature of the router for security and to help protect your privacy and important data from hackers. Be sure to use a very complicated password phrase, otherwise, it won't be as secure. I have found a nice, easy to read, link to help you get started in setting all this up. It is:

http://www.arstechnica.com/paedia/w/wireless-security-howto/home-802.11b-1.html

Well, I hope this helps. Good luck and "try" to have fun. (it's suppose to be fun isn't it? ;-) )

by wlbowers

To network wired or wireless you will have to insert a router gateway.

Numbers I give here will be Linksys. www.linksys.com

With one wired computer a wireless gateway with a 4 port switch is needed. BEFW11S4

The router will connect to the cable modem and maintain the internet connection.

The Desktop computer will connect to a port on the switch. The router part of the BEFW11S4 will provide a DHCP server that will assign tcpip addresses as a computer boots. This happens on the wired and wireless connections.

Now you have two ways to connect your laptop to the gateway. If it is in the same room you could run a wire from the switch to your laptop. The other way is via a wireless card or adapter.

Now for the wireless connection you will use a WPC11.

Hope this helps.

Lee

This discussion is closed to new replies.