Question Locked

AAA - local authentication on console

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi.

I am working on Cisco 2800/1811 routers. I have set up authentication via a TACACS+ server but I will like to have the console line authenticate via the local database. I have tried the aaa authentication login command but I see there is no specific command for the console line.

I will like to know if this is a possibility and how to go about configuring it.

Thank you.

2 replies

by tecmjl1981

What you need to do is in global config mode is type this (this is an assumpton that you have a local database configured and you also configured AAA by using the global command aaa new-model)

router#(config) aaa authentication login default local (where default is you can name it up to 31 characters)
router#(config) line con 0
router#(config-line) login authentication default (or the name you used in the previous command would replace default).

If you have any other questions feel free to ask.

This discussion is closed to new replies.