8 replies
by qballrail
I have a KT7A-RAID board and have problems with it. Different issues than yours but it appears that you might have a faulty BIOS chip. You've apparently tried everything feasable short of contacting Abit directly. I checked the website, abit-usa.com and the board has been discontinued as well. But contacting them directly may be your only option.. if it's still under warranty they may do an exchange with you otherwise they should still give you support. Sorry this wasn't more helpful but Ithink that's your best option.
Try this link: http://fae.abit.com.tw/eng/contact.htm
Good luck!
by ninet4
by thechas
Try removing the CMOS battery, and un-plugging the power supply.
Leave them unplugged for about 1/2 hour.
Then, reconnect power and boot up.
If you get into BIOS settings, then plug in the battery.
One trick I have found useful with ALL socket A motherboards is to set the CPU speed and multiplier manually.
Also, check out the FAQs published at http://www.sudhian.com/faqs.cfm
Paul's FAQs are very informative.
Chas
by thechas
I believe that DR is just trying to bolster your confidence in my answer.
To DR, I appreciate the confidence and recognition.
Chas
by ninet4
by cg it
by ninet4
by ninet4
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending