Discussion Locked

About NAT and DNS behind firewall

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am using windows 2000 adv. server NAT for internet.I also installed IIS server on my w2k adv server and published some sites on it.My clients are sharing internet through NAT and it's working fine.Now i want other peoples from my outside network can use it and also my internal clients.How i configure it so that other peoples can use it.Second i heard that DNS behind the firewall how i configure it on my w2k adv. server.
Anurag.

3 replies

by cg it

ok, your question is how do you get external "users" to be able to view the web and/or FTP sites that you have published. First is, you have to have a static IP address assigned to you by your ISP. Second, if you wish external uses to be able to "find" your site by typing in a name, you must obtain a FQDN [fully qualified domain name]. Once you have a FQDN, you can notify your ISP to use a host header with the static IP address they assign you. That way, instead of typing http://4.4.10.127:80 to reach your web site, external users type in http://www.. A Domain Name server is used for name resolution to IP addresses. It has a foward lookup zone and a reverse lookup zone that is created to resolve IP address to names on thenetwork when there is a query. As far as setting up a Domain Name Server, I suggest doing network planning before hand.

This discussion is closed to new replies.