Discussion Locked

Accessing Windows 2000 Shares from Win9x

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got a network (TCP/IP) set up mostly with Windows 9x computers.
Recently I upgraded a couple of the larger machines to Windows 2000
Professional. In doing this, I had to re-share the directories that were
previously shared and am now facing a problem. When a Windows 9x
computer tries to even view the shares listed under one of the Win2k
computers, A prompt for password entry box appears, claiming a password is
needed for the "\\COMPUTERNAME\IPC$" share. I've never seen this share,
nor set it up. On the other Win2k machine, when trying to access the other
Win2k machine, a prompt appears to access "\\COMPUTERNAME\" with
both a user name and password entry field.

How can i make Win2kPro have anonymous network access to the shares
that were previously shared (not needing a password or prompt of any sort)
under Windows 9x??????

thanks
brandon

16 replies

by syscokid

I came across this in a previously-asked question:

"Heads up on this... According to Microsoft, Windows 2000 disables the Guest account by default... Result is that a "new" Windows 2000 install introduced into a network will greet each peer with a spoof message about IPC$ UID and PWD. The fix is to enable Guest on the Windows 2000 machine."

If that doesn't work for you, do a Search Q&A on "IPC$". There are several other recent questions on the same subject. Other answers include makingssur ethat the 9x machines are logging on with a domain account, and making sure the password isn't expired.

by bc3 technologies

enabled guest. now not getting a password prompt, but seeing "computer not accessible" from the win9x computers. searched the other questions. nothing helpful.

by bbradford

The following should also apply to Win2K professional:

Log on to Windows 95 with a Valid Windows NT User Account
---------------------------------------------------------

Log on to the Windows 95-based computer using a user name and passwordthat is
contained in the local user accounts database of the Windows NT- based computer
you are attempting to browse. To do so, follow these steps:

Windows 95 without Internet Explorer 4.0 installed:

1. Save and close any open work on yourcomputer.

2. Click Start, and then click Shut Down.

3. Click the "Close all programs and log on as a different user", and then click
OK.

4. Click Yes.

5. When you are prompted, log on to the Windows 95-based computer with a user name and password contained in the local user accounts database of the
Windows NT-based computer you are attempting to browse.

Windows 95/98 with Internet Explorer 4.0 installed:

1. Save and close any open work on your computer.

2. Click Start, and then click Log Off , where
is the name of the user currently logged on to the computer.

3. Click Yes.

4. When you are prompted, log on to the Windows 95-based computer with a user
name and password contained in the local user accounts database of the
Windows NT-based computer you are attempting to browse.

Set Up User Accounts in the Local Accounts Database
---------------------------------------------------

Use the User Manager tool to set up user accounts in the local accounts database
of the Windows NT-based computer that you are attempting to browse. These user
accounts need to contain the same logon information (user name and password)
that is used when a user logs on to his or her computer.

by gladish

Brandon-
I saw your message a few days ago, but couldn't remember how this worked.
Had to reinstall a W2k on my network and worked through this again to be sure I understood.
You have to make an account on the w2k machine that matches the one logged on to the w98 machine which is trying to access shares. (create new accounts in: computer management/local users and groups/users)
Then the w2k machine will allow access to the shares. You sound like you have a workgroup, so that's the way I described it, but with w2k it behaves more like a domain account!
Good luck

by qb

On the w2k machine right click on the share and select sharing> then click on permissions> (the everyone group should be in there by default) click add> select ANONYMOUS LOGON> click add> cilck ok> set permissions however (read by default)>click apply> click ok> click apply> click ok. I have had the exact same problem and this worked for me.

by bc3 technologies

Please only answer this question if you have a solution that does not include me creating about 50 new accounts on my computer simply to share stuff. i want anonymous, no prompt access available to my computer from anybody that plugs in to our hub. simple. thanks.

by idecom

Espero tengas traductores par espa?ol...
se leer en ingles pero no se escribir, y si se la respuesta...
entra al panel de control y la opcion Herramientas administrativas, administracion de equipos, usuarios locales y grupos, invitado, deseleccionar passwords...
eso es todo

y en compartir (share) la carpeta ulige uno nuevo

by maxwell edison

Greetings,

When trying to access a network drive or printers share on a Windows 2000/XP computer from a Windows 95/98/ME computer, you may receive an IPC$ dialog box like the one above. (See link for the diagram "above")

If you do, then you need to configure security on your Windows 2000/XP computer.

Cut and paste this link for the whole story, resolution, diagrams, etc.

(REMOVE SPACES from the pasted URL if they snuck in.)

http://www.homenethelp.com/web/howto/win2k-ipc-error.asp

Regards,

Maxwell

This discussion is closed to new replies.