Question Locked

add dual boot XP to 2k3 server - no CD

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 2k3 server installed on C: and I want to add an XP OS on D:

The laptop has no floppy or CD and will not boot to USB devices. It is not Vista ready.

I have tried to start XP install from a virtual CD and get scary messages about destroying the 2k3 OS install.

It seems to me that I should be able to install XP to D: from a virtual CD without seriously damaging the 2k3 OS on C:, except possibly the boot files in the root of C: which I can later fixup.

Can this be done and what are the steps?

Thanks.

11 replies

by metrovavin

a) I want to install XP to drive D:, a separate physical drive.

b) I believe that other times I have installed a second dual boot OS, starting the DVD from Windows. It copies the necessary files to a temporary directory on the hard drive, along with a boot system, and then reboots the computer to the new installation on the HD.

Aside from the fact that I think I have seen it happen, I also don't see any reason why the DVD can't do this first step, copying the files to the hard drive and rebooting, when running from within windows, as long as the version of windows running is compatible with the install executables. Also, an upgrade is often done by starting the install DVD from within the OS to be upgraded.

c) A VM would work, but I want a second OS in order to be able to work on the first one while it isn't running, and as a backup in case the first OS fails.

by seanferd

backup your boot.ini and ntldr

It will install to the D: drive, but boot files are always written to the primary active partition. You may need to replace the XP ntldr to get it to boot, then you'll need to modify boot.ini to give you dual boot.

If it wants to write to the C: drive otherwise, it may be trouble. Best way is to unplug the C: drive and install with D: connected only, but you don't seem to have that option.

by 93961

If you would like a machine to be dual boot with XP & 2K3 then you will have to install XP first and then 2K3. You are doing the reverse hence the message as in every OS install in a multiboot system the boot sector is overwritten with the latest Master Boot Record of the latest OS leting the previous installed lower version of the OS or OSes to boot. Thus allowing multiboot with different OS or even with same OSes.

by seanferd

Although I wouldn't bother trying to install anything to a system with no removable media capabilities. Everything over a network? Ugh.

Then they complain when their high-end audio and graphics cards don't perform as expected.

by chi-7

I have generally found one incidence of Windows per platform to be more than sufficient, but I'm an elitist bastard.

by rob miners

in this thread as it makes the mind boggle as to what can possibly be achieved by using diskpart to select the bootable drive and make it Active, especially if it's on an independent cable, and then turn it back on in the other OS if you want the other drive. Some of the ideas in here have me thinking and you may come up with something.

http://blogs.techrepublic.com.com/window-on-windows/?p=992

by metrovavin

A lot of good ideas. Among other possiblities, BootitNG looked like it would work. However, it turned out my second drive bay for some reason cannot be made bootable, so I gave up.
Instead, I use a Windows Live CD to boot to an alternate OS for maintainance/anti-malware operations.

Also, I installed the OS by removing the hard drive bay and putting in the CD drive bay. Obviously, I can't use that method to install an operating system to the second hard drive. I could have partitioned the internal drive using Partition Magic or something, but it wasn't worth it.

It's easy to install Windows 2003 server to a notebook computer. The reason to do it is that this operating system makes a better workstation than XP, it has a different core; although now with SP3 there is less reason to do it. After installing, there are procedures to configure it for workstation use.

by rob miners

with SP3 for quite awhile now with no problems. I'm happy with it. :D

This discussion is closed to new replies.