Question Locked

Adding a broadband router to my existing wired network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I already have a fully wired network and want to add a broadband router. The existing LAN connections are already being used on each individual computer, so how do I go about adding in the broadband connection without loosing my original network? The new router only has a LAN cable connection, no USB facility.

3 replies

by wizard-09

Add the new router to your old router via a free port, configure the new router to be a bridge connection to the 1st router and turn off DHCP on the new router hope this helps.

Edit http://routersetup.blogspot.com/2007/08/connecting-two-routers-wired.html

Check this link out for help if you need it.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by oh smeg

Or a WAN connection. If you have remove the external device that allowed you to connect to either the Internet or WAN and replace this with the New Router but only after you have setup the new router and made sure that it actually works by connecting it directly to one computer with a CAT5 Cable and it's external connection.

If this is a new device to allow either a Internet or WAN Connection you can do a couple of things depending on what it actually is. You do first need to setup the Router so connect it to the external In Wire whatever that is and plug a computer directly into it and run whatever came as a Setup Utility to configure the router. Then return the computer to the original connection and run a CAT5 Cable to a empty RJ45 Socket on the Hub/Switch that you are using. If you do not have any available RJ45 Sockets you can fit a second LAN Card to a computer and bridge the 2 LAN connections to allow the network computers to connect to the external sources.

Col

This discussion is closed to new replies.