3 replies
by lordinfidel
There are several steps to doing this, but it can be done.
FYI- Your win2k dns server does not have to be a domain controller. It only has to allow for dynamic updates.
If you really want another DC, especially for redundancy purposes.
On the new 2k server, run dcpromo (start/run/dcpromo) Enter the new DC into the same domain.
Once AD is installed on the new DC, Make sure you go to Sites And Services and set it up in there (site links, etc)
If you want this to be a DC that can also be a Global Catalog server, you enable that in Sites and Services under NTDS for that server.
(I would do this next part when your network is not being used and all users are of the network)
Once That is all set up, install DNS on the new server. Get your initial zone records correct. Only put in hosts that have static entries. Make sure that it is set up to accept dynamic updates.
Once your DNS is working on the new server. You will need to point your clients to the new DNS server. Do not forget to point any statically mapped ip clients to the new dns server.
Reboot your old DC and any other computers that had static IP's. This way they register themselves in the new DNS.
I suggest getting this book.
Inside Windows 2000 server by William Boswell, published by New Riders.
by newbius
by newbius
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending