4 replies
by ian wall
Get all the work off the Laptop that you want to keep then blow the laptop away.
Install a Clean Windows 2000 install on your C Drive under the folder:
C:\Win2K1
This will be for ?CompanyA?
When you have fully set up Windows 2000, start another Clean Install on the same partition under:
C:\Win2K2
Finish this install fully (making the same choices as you did in your first installation.)
Go to you C:\ and open Boot.ini in notepad.
you should see something similar to the following:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINNT="MicrosoftWindows 2000 Professional" /fastdetect
Change the boot.ini file as follows (be careful doing this):
[boot loader]
timeout=120
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional - Company A" /fastdetect
\WINNT="Microsoft Windows 2000 Professional - Company B" /fastdetect
You should have changed:
the timeout from 30 seconds to 120 seconds
- this will give your friend some extra time to choose between the two boot up modes.
The first "Windows 2000 Professional" to "Windows 2000 Professional Company A"
The second "Windows 2000 Professional" to "Windows 2000 Professional Company B"
Now reboot the laptop and when you get the "Choose which operating system to use" menu, choose which Company you are in.
Read on to my next response.
by ian wall
Boot into ?CompanyA? and add it to the CompanyA domain. Your network administrator can do this. Then install all programs relevant to that company in the default installation folders, ie. Office etc.
Take your laptop to CompanyB. Boot into CompanyB and add it to the CompanyB domain. Now install all programs relevant to that company (again in the default folders). This will add all the registry entries to each Windows 2000 installation whilst still using the same amount of space. Be aware that if you remove the program from one installation you will have problems removing the program from your other win2k installation.
It will boot into the Windows 2000 that is set up for that domain/company.
As a flag (so you know why you?re computer is not working some days) set the WallPaper on your CompanyA installation to something completely different to CompanyB so that you will know straight away if you?ve booted into the wrong one.
Another important point is that for "common files" you may want to create a folder on your C: Drive called Common
Set the NTFS Permissions as \Everyone - Full Control so that you have full control no matter where you are or which logon you are using.
This may prove to be a problem but I'm not sure:
If your username in CompanyA is BloggsJ
and your username in CompanyB is BloggsJ you may have a bit of an issue, so talk to your Net Admins about it and check.
Best of luck
Let me know if you have any problems.
Ian,
Thanks for your reply. This is the first time I have used a discussin forum and I must say I am impressed!!
Thanks again!
by lordinfidel
A much simpler way would be to take the laptop out of all domains.
Then create a local user account on the local mahine.
Using that same local account u/p combo. Ask each admin at both sites to create the same u/p.
Now whenever the user plugs into their local lan and requests files off of one of their servers. The server will validate the local u/p against what it has in it's domains sam. If it is correct it will allow you access.
This is true of NT4 domains. 2000 AD domains area little more stringent.
It also will help to have a static lmhosts file created with entries for the servers that the user needs to access. That way they do not need to request a browse list.
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending