Question Locked

Another day another problem -> Windows explorer crashing

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

after a week and a half, I think I am starting to regret buying this new computer.

this time, this is my problem:

every second time I plug my Sony 8GB microvault in, then open my computer, windows explorer crashes, that is kind of annoying , but then windows explorer does not restart, meaning I have to reboot windows.

upon reboot I get a BSOD, which is a stop: 0x0000007E. after which windows boots normally, and I can access my drive.

the weird thing is that it only doe that every second time.

specs are still:
Intel i7 920
MSI X58 PRO mobo
6GB RAM
elitegroup Nvidia GeForce 9800GT 1GB
1TB HDD
Vista Ultimate 32-bit
2 screens (ViewSonic VA1912w and Samsung 2333SW)
Logitech MX5500 bluetooth keyboard + mouse

17 replies

by seanferd

http://support.microsoft.com/kb/930979
(For the BSOD)

Not sure why this is crashing explorer, but instead of rebooting, open task manager with Ctrl+Alt+Del, and start a new task explorer.exe. Or, in the Vista equivalent of Folder Options > View, select "open folder windows in a separate process" or similar, so if that instance of explorer as a file manager crashes, it won't crash the entire shell.

Finding out why the drive crashes explorer in the first place will be interesting. Have you checked the event logs or drwatson logs?

by .martin.

I did try to activate it, but needed to partion my hard drive, I couldn't be bothered, so it still off.

as for Microsoft, I tried installing the hotfix they say is relevant for the problem, the hotfix though, says it does not apply to my system, otherwise they say scan the disk for errors, none were found.

as for error log here are 2 critical messages, both received twice:
- The device Storage Media (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 4 more times. Please contact the device manufacturer for more information about this problem.
- A problem has occurred with one or more user-mode drivers and the hosting process has been terminated. This may temporarily interrupt your ability to access the devices.

otherwise, I selected to Launch folder windows in a separate process.

I'll see how this goes, and keep you posted.

by rob miners

Check the Event Viewer.

Check the problem history in the Problem Reports and Solutions control panel.

Have you recently installed anything new?

Edit: to add

It could be caused by a mis-behaving shell extension. Try using ShellExView to disable all shell extensions that are displayed in a light shade of red and then, if the problem goes away, enable a few at a time until you find the culprit.

http://www.nirsoft.net/utils/shexview.html

by .martin.

event viewer only reports
- The device Storage Media (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 4 more times. Please contact the device manufacturer for more information about this problem.

and

- A problem has occurred with one or more user-mode drivers and the hosting process has been terminated. This may temporarily interrupt your ability to access the devices.

Problem Reports and Solutions shows windows crashing a couple of time (all the same problem), some programs that crashed, and device that drivers could not be found.

as for recently installed programs, the computer is nearly 2 weeks old, so everything is new. I think there might be something wrong with FusionHDTV (tv card driver/program). it is the only program that I didn't use on my old XP box

by rob miners

the drivers for Logitec.
Do as Sean suggests and update any drivers that you may find for the stick. Have a look at ShellExView.

Try uninstalling FusionHDTV and if you have a card remove it to see if it is at fault.

by .martin.

it seems the problem is with windows not mounting the drive properly.

when it mounts correctly, a windows comes up asking what I want to do.

when it does not mount correctly, this window does not come up, explorer crashes (Vista doesn't die now, thank you seanferd) and GoodSync trys to, but can not connect.

what is weird though, is that the drive still comes up under safely remove hardware, but you can not remove it (send it into continuous thinking)

by .martin.

the drive is a Sony 8GB USM8GL Microvault.

as for the programs:

don't use ReadyBoost, don't need to

uninstalled Virtual Expander on XP a few months ago

does not have a fingerprint reader

also tried formatting drive with sony software, no change.

by seanferd

I'd make sure that all possible drivers or software for the USML are updated from Sony. Also, when you removed the Expander, did you use the Sony removal tool?
http://www.sony.net/Products/Media/Microvault/products/usm-l/dl.html

http://www.sony.net/Products/Media/Microvault/support/index.html#support03

**When the Micro Vault is connected to a USB port, the device is recognized and the drivers are installed, but the Micro Vault drive does not appear in My Computer.
If you are using a network drive, please set the drive letter of the network drive to one that is at least 2 higher than the actual drive letter. For example, if a hard disk is Drive C:, another hard disk is Drive D:, Drive E: is the CD-ROM, Drive F: is a Memory Stick and Drive G: is the network drive, the Micro Vault drive will not appear. In this case, set the network drive as Drive H:. After doing so, plug the Micro Vault back in and the Micro Vault drive will appear in My Computer as Drive G:.

**My computer does not recognize the Micro Vault.
You cannot use the Micro Vault with unsupported operating systems. Please check the OS
compatibility chart. In addition, the USB switch in the BIOS of older PCs may be turned OFF.
Please read the PCs instruction manual and turn the USB functions in the BIOS ON. (We do not
recommend that beginning PC users change BIOS settings.)
If the host device does not recognize the Micro Vault Tiny, please make sure that the device is plugged in correctly as described in the product package.

- When using on Windows Vista -
The driver cash file for Windows may be damaged. Please download available software patches from Microsoft Online Support site (http://support.microsoft.com/kb/940199/en-us), and apply it in line with the instructions.

** The message "Storage device in use" appears and the Micro Vault cannot be disconnected.
An application that is using the Micro Vault is still running. Quit the application software before disconnecting the Micro Vault.

by rob miners

also drop the amount of RAM that you have in there. 32bit only supports up to 4GB.

by .martin.

finally tried ShellExView today, disabled everything except mcafee (last time I disabled on bit of it, everything went crazy), and it made no difference.

also i will note that it is not the sony microvault, it is every USB drive, and it is now occurring every boot, unless the drive is plugged in before boot. except for my LaCie 500GB external HDD, which works every time.

by rob miners

Vista & W7

Press the WinKey + Pause
Click Advanced and under Startup and Recovery select Settings.
Uncheck Automatically restart.
Click on the dropdown arrow under Write debugging information.
Select Small memory dump (64 KB) and the output is %SystemRoot%\Minidump.
Restart the PC normally as this will allow the System to Blue Screen and create the Minidump.

Insert the USB device that you are experiencing problems with.

Minidump Files can be found here. C:\WINDOWS\Minidump\Mini122707-02.dmp

How to read the small memory dump files that Windows creates for debugging

http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and brows to the Symbol folder that you have downloaded and installed Symbols to, select OK.
Close the workpage and save the Workspace information. This should lock in the Symbol path.
Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.
There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.
When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.
Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.
FAULTING_THREAD: 864f6a98

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT:
f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585

STACK_COMMAND: .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP:
sgiul50!DrvBitBlt+585
bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

by rob miners

A temporary solution until I get to the bottom of it but I think I'm on the right track. It appears that Vista and W7 have a problem with the PageFile. Resizing the PageFile may help. You could try it or you can try this.

I have been testing different avenues for the problems with explorer in Vista & W7. Explorer is constantly crashing in W7 and I had the same symptoms with Vista whenever I do a search on a network drive. I tried this a couple of days ago and I haven't had a crash since (touch wood). It's the Best non Command line Ram drive that I have used for awhile as well. If you are using 3-4GB of Memory give it a try.

I created a RAM Drive using the default R: and relocated the PageFile. No problems with PageFile fragmentation as it is recreated on startup. With 3GB of RAM I have allocated 1GB to the RAM Drive and created a PageFile of 768Mb with a max of 768Mb. Copy the extracted folder to Program Files and run it under Admistrator on Vista/W7.

Free Ramdisk for Windows Vista, XP, 2000 and 2003 Server

http://www.mydigitallife.info/2007/05/27/free-ramdisk-for-windows-vista-xp-2000-and-2003-server/

When you have it all set Defragment the Hard drive.

by .martin.

completely going crazy right now (close to exploding...), but will have to give that a go when my days slow down (July...).

As for the problem, it is being odd, and another problem which may be linked has shown up.

As I have 2 DVD drives I keep a copy of Call of Duty: World at War (good at distracting me...) and I find sometimes at boot, windows freezes before the log in screen if I have the CD in, so I took it out and plugged in my flash drive, and it worked! rebooted to check and it stopped working... fast forward to today, and I plug my drive in again and it works, not holding my breath, it will probably stop working again :) .

as for my new problem; I am having trouble copying, moving and deleting files, but only from one directory on the hard drive to another directory (or delete from the HDD), I can copy files from CD's and DVD's to my computer without trouble. so it leads me to this, could all my problems be because of a dodgy hard drive?

by rob miners

that I haven't had two installs of Vista that feel the same. Something is always out of kilt. I normally don't have two Burners attached at the same time. A DVD Burner and a DVD Reader seem to go together. I also use Virtual Clone drove for ISO's.
On my Systems I setup my Partitions with DiskPart and I normally create three 'depending on the size of the hard drive' and they are Primary Partitions with the first one being Active.
I then install and format with Vista and format the drives when I am finished loading. I sit back and relax after installing my AV and updates while Vista does its updates. It always finds my Realtek sound drivers, Network and Video. Doing it that way I have had some success apart from Explorer which is under control at the moment.

by brian

I noticed that you are running Vista 32 bit but 6gb of RAM. I know that 32 bit XP would have thrown a fit with that and crashed all the time. Have you tried removing some RAM just to see what would happen (taking it from 6gb to 3 or 4 gb)? It is just a thought, I know Vista 32 bit should not have a problem with it, but hey, it is Microsoft after all, and who knows what kind of strange random bugs may arrise!

This discussion is closed to new replies.