Question Locked

Asus a8n-sli prem. wont enter bios HELP

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
when i turn on my computer it loads the motherboard logo and says press DLT to enter setup. I press enter and it says ENTERING SETUP but it doesnt , it brings me to a screen that says raid utility press f4. if i leave it alon windows loads, but no setup menu...also if i just let the computer boot without pressing enter it still brings me to the raid utility prompt. help!!!also i tried to upgrade my xp and now its giving me errors

8 replies

by mjd420nova

In most cases, you hit the DEL or "delete" key to enter the BIOS setup.

by dj_skirmish_dj

i know. but when i hit delete it says its entering setup but never does. it jumps right to the press f4 to enter raid utility screen

by chezbay

I had the same problem. That RAID screen wait is ridiculously long. If you don't use RAID drives, disable in BIOS and it will skip. Now, to get into the bios, I had to reset the CMOS, which involves moving a jumper for a few seconds while the motherboard is completely unpowered. Some combinations of settings trigger this hangup but I don't know which ones. Once you're in, you'll have to reprogram all your choices and even the time and date. Recall that there are two different RAID mechanisms available on the board and you should disable all that you aren't using. Tho only one of the two mechanisms has this rediculously long timeout and potenetial for hangup.

Good luck.

PS be sure you've got ASUS's latest bios flashed in o imer chip

by mib.2945

To reset the bios on any board. Power down, unplug the power cord from the pc. Remove the cmos battery (round silver flat battery towards the center of the board) make sure its out of the system and its not plugged in. Press and hold power button 5 seconds. Put battery back, close up, plug in, start up.

Much faster and more certain than any jumper

by dj_skirmish_dj

well i unhooked the a/c cord and removed the battery and switched the jumper.....waited 1 min placed battery back and switched jumper back and then powered up! BANG NO VIDEO!!!!COINCIDENTLY this is the reason i trashed my last asus board the a8n-sli deluxe. mobo powers on , fans move, i can hear the hard drive, vid card works but no video

by ngruloos

Hi dj_skirmish_dj, it is very likely that the oun of your component (motherboard, videocard or or the power supply) could not pass the POST (Power-On Self Test) even before that you reset the bios.
If you have another video card, you could give a try, do remove any other unnecessary component for a display (hdd, cd-dvd, floppy, usb devices, all pci boards, remove as must memory as you can) and also change the power supply, this is a very frequent cause.
Hope this helps,
Cheers,
Nico

by dj_skirmish_dj

ive already done this multiple times. in fact this is the second asus board to do this to me in 3 mos. i think asus needs to do some quality control on the boards. the more i read i see people with the same prob. im gonna RMA this week .....

This discussion is closed to new replies.