Discussion Locked

Backup and Restore with Image Files

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am about to run a pilot program for centralized backup and restore of data on a small LAN. The approach calls for creating image files of directories used to store the data. If anyone would like to give advice on what to do or not do in the test, I would appreciate the input.

I am running Windows 2000 peer-to-peer. There are two shared 80gb drives on a Fast Ethernet LAN that uses TCP/IP protocol. One drive is used to store images, sound clips, and video clips. Remote users download files from it. The other 80gb drive will have MPEG files on it, and files created with Microsoft Producer. These files are destine for offline media, or otherwise will be moved off the LAN.

After formatting these drives, and leaving space available for defragmentation I would estimate 62gb of storage available for data. Does anyone take issue with this?

If I created one logical directory on each 80gb drive, and replicated a distribution of files of the types I expect to store on the drive, I could make one image file of the directory, and see how large that file would be.

I plan to transfer the backup files from each workstation to a separate workstation on the LAN where they would be moved to offline storage. I am wondering how to log DTRs and automate the movement of the backup files from multiple workstations to a central workstation. I want to make sure a workstation is completely backed-up to offline media before starting transfer of the next workstation?s backup file.

3 replies

by sgt_shultz

fwiw
insufficient data. domain or workgroup? RAID? how many imaqes. probably impractical/unsatisfactory due to file sizes imho.
tell you what i'd do if i could, get spare hard drive for each workstation. install it, image other drive to it, uninstall it and store off site. for 2 80gb shared drives, same thing, plus: have another whole set of replicated drives. keep them waiting to go online as replacements. can you use external firewire drives?
drive partition image files will be about 2/3 of used space on drive at best. and compression has gotchas. if unconpressed, image will be same size as used drive space...so 40gb or so. huge to be moving about via the network even at 100mb imho. creation of the image goes very fast but moving that image from drive to drive or over the network might take a while...
and i believe you are forced to use ntfs at that drive size. have you played with your imaging software to see what limitations you will have dealing with large drives/partitions files of that size...
the knowledgebase articles for Ghost at www.symantec.com might be of interest. i believe their product to do the stuff you want has been discontinued. too many gotchas in ghost...it has it's place imho but a specific, narrow place. good tool in disaster recovery toolbox, not so good in daily backup toolbox...

by kcav

Thank you for your reply. I have not played with imaging software. My interest in using it is based on wanting to create small files sizes.

This discussion is closed to new replies.