Question Locked

Backup Exec 11d backing up Buffalo Terastation Problems

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello everyone! I am having an issue with Backup Exec properly communicating with a buffalo Terastation. I have read the many forums on TechRepublic as well as Symantec and Buffalo with no resolution. The issue that I am having is, as we've all heard before related to this issue, an access denied error in backup exec to the Terastation. I have verified that I am able to, under the account BESERVICE/Password, map and access the Buffalo NAS. Inside of backup exec, i had oringally entered an inclusion for \\NAS\Share, however, i found that I was able to push forward a bit more with \\172.16.1.150\share. However, the backups are still failing out, and byte size is not matching that of the NAS. I am able to obviously backup my C:\ on the server, but when it comes to the terastation, 0 bytes.....Any ideas since the last posts on these similiar issues. Buffalo was of no help to me whatsoever, and unfortunately, our service contract for Symantec has since expired with no option of re-applying. thank you to all for your help! Windows server 2003 with an active directory environment. NAS has been joined to the Active directory with it displaying under computers. Permissions: All are able to access under all domain logins, up to and including the BESERVICE.

5 replies

by bart777

Is the drive NTFS or FAT32?
BackupExec has issues trying to backup files to FAT partitions.

The only other thing I could suggest is to try a direct connect to the terrastation (If it has one.) By that I mean something like a USB or Firewire connection.

Run a smaller test backup of less than 4GB.

Try a windows backup to the same location to see if there is another error somewhere.

Hope this helps a bit. Let us know what happens.

by michael.mcgill

Thank you Bart for your response. I will attempt to review these items this morning and post my findings! Thank you!

by Former member

You can take out the drives and put them in external drive cases, but if you do watch out for the capacitor, it is big/black and round with a silver top (do not touch it) it will give you a nasty shock. Yes i have taking mine out due to similar problems, i have them in my computer now. Just to let you know there are alternatives to do a backup if one does not work.

Please post back if you have anymore problems or questions.

by dexterrutecki

You can setup the backup to the IP address, but backup exec doesn't recognize that as a valid path.

so you cansetup a hosts entry for the ip address.

Here is the solution: (or "a" solution)

#1

make sure you don't have any user permissions set on the buffalo share

(i.e. basic shared folder setup)

#2

Setup a hosts entry in the HOSTS file on the server that is running backup exec

c:\windows\system32\drivers\etc\hosts

put in the ip of the nas, followed by the name of the host entry that you want to use

example:

buffalobutt 192.168.0.250

#3

go to your devices in buexec and add the b2d folder.

just make sure that you use the hosts entry as the pathname of the share

example:

\\buffalobutt\backup\dailybackup

#4

tada! it works.

everyone else in every other article i've read seemed to give up,

...and started talking unix language, blah, blah, blah.

come one...fall back upon your basics people.

microsoft + veritas = hosts entries can be your friend

This discussion is closed to new replies.