Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I can't get them to print I tried the raw & the other suggestion with static ip address on new port. Everything says it's printing but when I watch que it deletes printing @ 99% status but actually never prints anything.
2 replies
by tobel Accepted solution
Clarifications
by wardciar Accepted solution
I have the same problem with my printing, below is a suggested fix from lexmark.
goto this site for suggested fix
http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:358:0:0&framed=&docid=ENUS14418&relevance=1
# Check the print properties for the affected device in the print queue:
1. Go to Start, Printers and Faxes.
2. Right click on the printer icon and select Properties.
3. When the Properties screen opens, click the Ports tab and verify that Enable bidirectional support is selected.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies