Question Locked

Belkin Wireless Router F5D7230uk4 Problem with "Virtual Servers" setup

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a Belkin Wireless router (F5D7230uk4) connected to a D-link DSL modem with a static IP.

The router has a function for port mapping/port forwarding from outside to inside LAN that Belkin call "Virtual Servers".

Does anyone know if this function really work on this kind of router. Iv'e tried opening different ports without any result - nothing happens.

I've also connected the computer running the FTP-server directly to the DSL-modem (with no FW at all) and the it works fine accessing with FTP.

I've also tried the DMZ function on the router that should put the FTP-server unprotetected directly on the internet - but with no result!

I seems like the port forwarding simple does nothing!

Anyone that has a solution or experince of this?

Br
Freddy

4 replies

by ihys07708

I've owned this router since May 2005 and the firmware is v4.05.03. I have a Motorola SB4100 Cable Ethernet/USB modem which was supplied when I signed up with Telewest (now Virgin Media) in April 2002. This is connected via Ethernet of course. Everything works perfectly with each other and I always achieve full speed while connected to my Broadband ISP, and I am on the 10Mb service.

I usually need to open ports for the FTP part of my Synology DS-101j NAS server box, so my friends and I can gain access. I also use it to make P2P file sharing work properly.

The DMZ section I use all the time and this is invaluable, particularly when giving programs like utorrent and Emule full access to achieve full speed downloading and uploading.

My only real gripe is that the Client IP Filter menu, does not contain enough slots to cover the full week with individual settings. My ISP is currently traffic shaping or capping connection speeds between 4PM and 9PM, but the Belkin only has six slots and I have to edit one of these once a week.

Overall I would highly recommend this router as it is reliable, quick and very easy to use. It also works with everything I have plugged into it, including a variety of laptops, PDAs, desktop PCs, Bluetooth Access Point and WiFi radio.

by kinoue

I had the same problem, but it worked after I changed the browser to IE (from Firefox or Safari).

Hope this helps.

by evlgod448

the virtual servers tab is were u can open up ports useing your router there for u can make servers and webpanges and ppl can get one them from around the world so all u have to do is go there and add a port name and the port u want to open up its # then put your ip address from your computer not your internet then enable and creat it then on the side were the tabs are there shpuld be a restart router some were do that and if u still are not able to get the port open restart your computer and it should be working fine then

This discussion is closed to new replies.