10 replies
by stillatit
The way it is now, if the server goes down, the users probably cannot print since they do not have the JetDirect drivers. If your server is fairly hefty and protected, this is probably not a problem, since a) the server won't go down often, and b) when it does they won't have files to print either.
If you have a reasonable server you are probably not loading it down at all with file and print unless you have a huge shop. (You can use performance monitor to see what the load actually is.)Adding the JetDirect drivers to each PC means that the users CAN print directly to the printers (but can still go through the server). This takes space on each machine, but disk is fairly cheap now.
I would recommend puting the drivers on the PCsof users who might need to print even if the server were dead, but leave their normal printing pointed at the server. Doing this gives them backup, but keeps the advantages of having centralized queueing (and print control).
Good luck.
by art23
by dcassat
by art23
by art23
by wlbowers
I have JetDirect installed on every machine in my network. They access the printers direct through HP JetDirect 500x print servers. No server intervention. This removes the load from my server and works just fine. I did this because I was having problems routing through the server. My printing is mixed with JetDirect and EpsonNet.
Hope this helps.
Good Luck Lee
by art23
by mishratron
by art23
by art23
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending