Question Locked

Best way to copy hard drive

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to copy my old hard drive onto a new one. Old drive has preinstalled xp home. I have heard everything from it cannot be done to can be done but will have some problems to that is easy. So far I have not tried. All suggestions welcome with the get off some big bucks responses excluded.

6 replies

by nepenthe0

PartitionMagic (Symantec) features a disk 'copy' utility. Connect the new HD with the computer powered off. Boot the computer and run PartitionMagic in the 'copy' mode. Be sure the new HD is formatted as a 'primary' (bootable) drive.

Alternatively, use NortonGhost (Symantec) to write an 'image' file to an external HD or to spanned CDs. Use the 'restore' utility to write the image file back to the new HD. You can also use Ghost to copy directly to the 2nd HD.

I recommend obtaining both, because disk partitioning is useful, and repartioning becomes necessary as folders/files accumulate.

Ghost is an excellent backup utility, one that allows you to boot a corrupted HD from the Ghost CD and restore an archived image of the operating system. Awesomely useful, particularly when System Restore fails (and it does).

Regarding costs, Ghost v.14 runs ~$70 from Symantec; ParitionMagic v.8 likewise ~70; Western Digital 500GB external hard drives run ~$130.

Rick/Portland, OR

by rob miners

If you had included make and model of the PC it would have made it easier to help. The Drive may have a Hidden Recovery Partition on it.

Do you have Recovery CD's/DVD's. If you have it would be easier to fit the new Hard Drive and reinstall with the Recovery CD/DVD. You would then have a fresh installation. You could then connect the Old Drive as a Slave and copy your Data to the New Disk.

Be Warned that if you are Cloning an IDE Drive to Sata you will have problems.

You may need another Drive to hold the Image from the IDe Drive. You wont be able to just Image the IDE to the Sata. Install the Sata Drivers to the IDe Drive and then remove references to to IDE.

1. Boot the PC system using the existing motherboard. If you've installed the UltraATA Driver (if so, Device Manager, IDE Controllers, Primary Channel will be lacking its usual "Advanced Settings" tab) then uninstall said driver from Control Panel and reboot before continuing.

2. From the Device Manager, open up the "IDE ATA/ATAPI Controllers" section. On a typical system there will be three entries under this - the controller itself, and then the primary/secondary IDE channels.

3. Double-click on the entry for the controller, and change the driver to Sata.

Tip: Don't forget to do the pagefile mod to turn off on shutdown to save a bit of space in the Image. Local Security Settings, Local Policies, Security Options, Shutdown: Clear virtual memory pagefile.

4. Now shut down the system, and take your image.

The HDClone Free Edition

http://www.miray.de/products/sat.hdclone.html#free

Some more

http://www.thefreecountry.com/utilities/backupandimage.shtml

A couple of good responses already
Good Luck :)

< bloody format > :)

by sthorn

Acronis TrueImage Echo Workstation (with universal restore option if your going from ide 2 sata) is the easiest to use that I've worked with. Pop your new drive in. Boot up with the Acronis Boot disc. Image the C drive staight to the C drive. Restore that image to the new one. Shutdown. Take out the old drive, reboot and your done. Cost about $80.

Of course I'm sure theres freeware that will do the same thing though. google it, i've heard of people using clone maxx successfully but i've never tried it. good luck

by nepenthe0

Steve -

If you understood everything True Blue taught you in his response, you didn't need to post a query to TechRepublic.

Sometimes it's worth spending a bit more to have fewer hassles in life. You need a backup strategy - an external HD is fast and versatile.

If you can read techo-geek, go ahead and use the 'complimentary' software available with the new HD. Every time True Blue posts a response, I learn something new. That said, if you want to replace the HD with a minimum of frustration, do it with user-friendly software such as PartitionMagic.

Rick/Portland, OR

This discussion is closed to new replies.