Question Locked

BIOS Does not Detect HDD

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 320 GB SATA Western Digital HDD, suddenly I recognized that the HDD is working too slowly, then I restarted the computer but BIOS did not detect the HDD and the slot in the BIOS was not shoing anything I mean that it was not even written "None" it had no text and as empty. I had checked the HDD in other PCs but still have this problem.
Please help me. If it is damaged, is there any solution for this? Because I have critical information on my Hard Drive.
Many Thanks

3 replies

by thechas

If the drive does not work on multiple computers, it is VERY likely that the drive controller has failed.

If the data is critical, you have no choice but to use a data recovery service. Prices start at around $200 (US) and go up from there.

While there are things you can try, you risk the total loose of all of the data. Or, at least risk a higher cost for data recovery.

There used to be a TR article and download that listed 200 ways to attempt to recover files from a dead hard drive. But, it is no longer listed.

The best advice I can offer aside from a data recovery service is to get an identical drive and try swapping the controller circuit board between the 2 hard drives. You might get lucky.

Chas

by oh smeg

Depends entirely on what Brand & Model of M'Board you have here some do not show SATA HDDs when you open the BIOS.

As this is a WD Drive have you tried scanning it with WD's Testing Utility? That will tell you if there are any problems with the Drive or not

http://support.wdc.com/product/download.asp?groupid=602&lang=en

You should also take a look at WD's recommendations for Data Recovery as well it is located here

http://support.wdc.com/recovery/index.asp?wdc_lang=en

This discussion is closed to new replies.