3 replies
by jonathanspinks Accepted solution
by thechas Accepted solution
Either find or download the manual for the P4G8X.
Looking through the manual, this motherboard is not supposed to have CPU speed setting jumpers.
I would check and verify that you have the correct and latest BIOS for the revision of the board that you have.
Sometimes, what needs to be done to get a motherboard to properly recognize a new CPU is to perform a BIOS reset.
Paragraph 3 of section 2.7 (Jumpers) shows where and how to clear the CMOS RAM.
Please make sure that you have the settings written down so that you can set them back to what was working for you.
Chas
by thechas Accepted solution
Got your message.
It is possible that the new CPU is bad.
Another possibility is that the vendor sent you the wrong CPU.
Go to Intel's web site and verify the part number on the new CPU matches what you expected.
The only other thing I can think of is that your RAM is not fast enough to support the 533 MHz front side bus and this is prohibiting the BIOS from setting up the CPU speed properly.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending