Question Locked

Black screen just before login, Vista

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have seen so many posts all over the internet regarding black screens before or after the login screen for Vista. The problem is, they all appear to be different.

In my case, the login screen will eventually appear, but not after a few minutes like some people. No, it actually takes 30 minutes or more. What's worse, is that it is happening on a few machines, all of them the same model.

HP dx2300 Microtower, with an NVIDIA 8500GT graphics card.

This didn't happen to begin with, but it wasn't long before it was happening on all the machines. I tried restoring to an earlier point, and it didn't fix the issue.

I had to disable the Nvidia service from running as that stops their roaming profiles from loading, but I'm pretty sure I've tested it after re-enabling the service, and still no change.

I have run sfc, nothing, startup repair, nothing. I can only assume that something is timing out just before the login screen appears, but what could it be? Nothing appears in the error logs.

If this carries on for much longer, I will be reverting all the machines back to XP.

5 replies

by oh smeg

And make a note of which driver is being loaded when the systems Hang?

That would be a starting point and it may very well be a Hardware issue not a software issue.

Col

by oursouls

Thanks for your reply, sorry I didn't post sooner.

I forgot to add that I had tried safe mode. Starting in Safe mode starts much quicker. I wouldn't say blisteringly fast, but it's certainly not blank for half an hour.

Having said all this, I have had to reformat one of the offending machines, and so far everything seems to be working fine.

I'll see how it goes over the next few days as it is always possible that the user is installing software that is causing this.

by oh smeg

If it is loading faster in Safe Mode then something that is loading when it is started normally is causing the problem here. And if it only starts to happen after a End User has used it for a while I would be looking at what they are installing too.

Col

by the scummy one

It only seems to appear on some systems, and usually after updating nvidia drivers. However, before updating te drivers, BSOD on the video card is common (ughh). So what to do?

Vista was supposed to make the video more stable, however, Vista seems to have just brought more video issues to the table.

I do not know about a 30 minute hang, that appears to be a real issue. I would say, it sounds like a hardware conflict or memory issue (virtual or physical).

Have you tried an add-in video card?

This discussion is closed to new replies.