Question Locked

Black Screen on Bootup for 3 mintues, then boots, any ideas?

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

About six months ago, my machine started giving me a black screen during the boot up process. As soon as I turn it on, I see the manufacturers logo (dell) for about 1 second, then it gives me a black screen with a flashing white cursor in the upper left hand corner. This screen last about 3-4 minutes, then it boots windows XP normally.

Last week I was in the room while it was booting, and I noticed that it was accessing the network during the black screen portion of boot up (activity light on cable modem was flashing, alot), which got me motivated to fix it. (not sure what that means). I ran virus scanners (McAfee) which found nothing, but I did check the log file in my scanner which shows that my auto virus screening is diabled everytime I boot the machine????

Checked partitions on the hard drive, found 2- my c:, and an unnamed partition of about 30 megs. (I dont remember putting a second partitions on there - would the manufacturer put that there to use as a virtual memory??)

Deleted all partitions and reformated the hard drive yesterday, and reloaded XP, but that still didn't solve it.

Loaded and booted the Windows Recovery Console, and ran the FIXMBR command twice, both times I get the message that "It appears your MBR is corrupted" or something like that but it doesn't fix it.

Do I have some sort of virus in the MBR that my virus software (McAffee, was up to date before my reformating) never caught or is this a hardware issue- something on the hard drive or mobo going bad?

I'm reloading some of the drivers tongiht, will reload McAffee and run it in safe mode to see if it can detect anything.

Any thoughts? Thanks in advance.

System - Dell 4600 from 2003, Pentium 2, with 512 megs ram, running WinXP

12 replies

by oh smeg

So starting with the Network Activity open BIOS and make sure that it is not set to Boot from the Network. If it is this is the problem it is looking for something that just isn't there.

The second Partition depends on th size of the drive and the type of computer you have Dell could have inserted a Rescue Partition there or it may just be unused space. When you format a drive not all the space can be used to store data on some needs to be kept separate to be the Drive Map so the drive knows where to send the heads to read/write data from. With a 40 GIG Drive and a NTFS Partition this is around 8 MEGS but is bigger on bigger drives. But as to the exact size I haven't looked recently well not since the NT4 days at least.

As for the MBR issue have you tried using the HDD makers Testing Utility the drive could be on it's way out or it may be developing Bad Sectors and need replacing for that reason. Seatools can be used to check the drive and is available free from here

http://tinyurl.com/27y63t

When you deleted the Partitions did you wipe the Drive or just use the Partition Tool available to you. If you didn't wipe the drive and have an infection it could carry over to the new partition as the Format option only writes to every third sector of the Disc. Also what Partition Information did you have after formatting the drive? How many Partitions show up now?

If you didn't wipe the drive I would suggest that you do it all again and this time wipe the drive with Boot & Nuke available free from here

http://tinyurl.com/4rfur

Downlkoad the CD/DVD version and burn it to a CD then boot off that CD to wipe the HDD. This will write zero's to every sector destroying all but the most invasive infections currently available but it is more than likely to clean off the drive completely.

With the drive unformatted shut down and remove the power lead for 5 minutes to allow everything to discharge and clear anything stored in the RAM or Cache.

Then insert the Windows install Disc and reload the system.

As for a Infection McAffee may not have stopped a infection and been disabled when it was installed on the system. The worse ones make out that the AV product is working when it's not and this type of attack is quite common with the more common AV products so while it may tell you that it's clear it doesn't necessarily tell you the truth. You'll need to scan with something else like the Trend Micro On Line Scanner or a Boot AV Product if you have access to one.

So reset the BIOS to delete any reference to booting from the Network, wipe the HDD and reload the computer then load your preferred AV product and update it before doing anything else. Then when you have a working AV product you can update the computer as required and load your desired software. You need to enable the Real Time Scanning to prevent a infection from occurring but this should be a reasonably safe course of action and not require anything more involved.

OH nearly forgot download Seatools and test the HDD before doing anything else. If it fails the test remove the HDD place it in another computer and check again. If it still fails the drive needs replacing. If it fails at first but passes the second test in a different computer the Drive Interface on the M'Board is failing and the M'Board needs replacing. It it passes the first test everything is OK and you don't need to do any more HDD testing.

Col

by william.n.craig

I checked the BIOS boot settings- there was no boot to network option. Tried several different settings, but nothing made any difference. I currently have it set to boot off the hard drive first with the options ot boot of CD, floppy, and USB turned off. Still no change.

Also tried setting the timout options in the WinXP Control boot up options to minimal, but that made no difference.

I'm running a full hardware diagnostic program that came from the manufacturer (dell) right now- it will be running for an while, so I'll check in the morning. I ran the short qiuck version andit didn't find anything wrong.

I thought I wiped the hard drive clean, but maybe I didn't. As for the partitions, it now shows a single partition of 111.75 GB, and nothing else. Its a 120G Hard drive, so I guess the remaining 8.25 is the NTFS partition (is is supposed to be hidden, because I don't see an unnamed partition of this size- it just shows the drive as being 111.75G

So to surmise:

1- I'll see if my diagnostic tells me anything in th AM.
2- will download the Seatools and check to see if the drive is failing.
3- will reformat the hard drive with Boot & Nuke, and reload XP after that.

I'll get back with you after I try that. Thanks for the help.

by william.n.craig

I ran the BIOS update first thing, and that seemed to take care of the pause during boot up. Since I had the time, I went ahead and ran the Nuke program on the drive, reinstalled Windows, reinstalled the BIOS updates, and everything seems to be running great.

No more 5 minute boot up. It boots in less than 20 seconds now. Sweet!

Thanks for all the help. I really appreciate it.

One other question:
I'm gonna get my network drivers loaded next, install the updates to windows, and install the virus software and all updates (McAfee). Once I've done that, I should be ok to reimport all the data from my bkup hard drive, right. If there is some squirrely virus that was hiding in my backup it should catch it, I'm hoping.

Computer sure is running faster now. Sweet!

by william.n.craig

Ran SEA TOOLS on it, it passed the Short & Long DST, and passed the Short & Long Generic. It failed the SMART check. I'm assuming this just means that my drive doesn't have that capability to begin with, since it's five years old?

I'm gonna operate on that assumption and run the Boot & Nuke now.

by oh smeg

Also before Nuking the HDD you could try returning the BIOS to Default Settings and see if that improves the situation.

Col

by nepenthe0

1) Make back up copies of any files you wish to preserve.

2) Run the Files and Settings Transfer Wizard ([i]old computer[/i]) and save this folder to a USB flash drive or to an external hard drive.

3) Run [i]Darik's Nuke and Boot[/i]:

http://dban.sourceforge.net/

4) Reformat NTFS
5) Reinstall Windows XP
6) Run the Files and Settings Transfer Wizard in reverse
7) Reinstall your applications
8) Restore your personal files
9) Invest in [i]imaging[/i] software such as Norton Ghost:

http://tinyurl.com/5s7gw8

10) [i]Image[/i] the clean installation with Norton Ghost to an external hard drive

Hope this helps. Not very clever, but it works.

Rick/Portland, OR

by rob miners

Click on Start, Run and type in msconfig and press Enter. Disable every single entry in the list on the Startup Tab. If it works you will need to re-enable the items in the startup list one or two at a time in order to identify which one is causing the problem reboot each time you change something.

Update all Motherboard Device Drivers. EG: Chipset, Video and Network.

by william.n.craig

tried to run the Nuke program but I couldn't make the computer boot off the USB key or 3.5 in floppy last night, don't know if it wasn't set right or if I have hardware issues there. (The dell hardware test program didnt' detect anything, and both USB and floppy drive seem to work fine.)

Anyway couldn't get it boot to the Nuke program, and didn't have the ability to burn a CD at the house. I'm gonna make a bood cD today at work and then try it tonight, but I will try the BIOS update first.

by oh smeg

Load the Network Drivers and then the AV Software before doing anything else. After you have updated the AV Product then log onto Windows Update.

While not common I have had one instance of a computer getting infected while Windows Updates where coming down the line.

Col

This discussion is closed to new replies.