Discussion Locked

Blank Messages in Outlook 2003

0 helpful
25 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Greetings all!

I have an interesting problem occuring on a couple of workstations that I can't figure out.

They were both recently upgraded to W2K Prof and Office 2003. The latest Office and Windows patches have been applied.

When they send an email message, (internal), the receiver gets a blank message. When I look in their Sent Folder and look at the message, it too is blank.

Although I've researched this and found a couple of similar problems, they point to two issues that do not apply. One is with ccLotus and the other with Exchange 5.5.

Any clue? Thanks in advance!!!

Rick Forsythe
Systems Administrator

25 replies

by lickity40

Greetings:

I guess this is too much of a mystery. In any case, I will add that in my experimentations, I found that this problem does not occur when a user sends the message in plain text rather than html. I don't know if it's certain background images that's causing the problem or all. I'll continue to test and post my findings here.

Thanks!

RF

by gralfus

I don't know if it can be set for incoming messages, but you might check the font color settings to see if they are set to white with white background. Can you select any text by dragging the mouse on the blank text?

by lickity40

Thanks for the reply!

Actually, that was one of the first things I looked at. In both the sender's Sent folder and the addressee's Inbox, the message contains NO text. In fact, when I looked at it in html source view, there was no text except for the basic html code for beginning and end...

Also, this same thing is happening on other workstaions where I upgraded.

Thanks!

Rick

by ktimm

We are also having similar problems. The to/from subject and sent/received information is all there but when you open up the message (or just have a message preview open) there is no message. It's completely blank. Even the same as far as the message information just containing the basic starting and ending html source. What e-mail server are you running? Exchange 2003? Have you applied the Exchange 2003 sp1?

by tr

I have the same problem, but not on exchange server.

This is happening to me at home with Outlook 2003 and NO exchange server.
Every bit of info counts!

by lickity40

...of info! That confirms for me that it is in the client mailer. In fact, the first clue was when the message in the Sent Folder was blank also. (this wouldn't have made it to the server)

Regards,

Rick Forsythe

by nicholas.steblay

I had the same symptoms, all Outlook messages were blank. I uninstalled a PGP add-in I had installed for secure email. Once the add-in was un-installed everything started working. Look at the Outlook add-ins you have installed and uninstall them.

by lickity40

I thought all the responses were in for this. Have you resolved your problem? We are still using Exchange 2000 with SP4 installed. The stations, as I beleive I posted previously, are running Office 2003.

Regards,

Rick Forsythe

by rwhite

Are you using word as the email editor? If so MS WORD needs to be registered before it can be used. You will need to open word as the administrator so other users (and Programs) can use it.

Another issue is active scripting make sure that is enabled.

1. Close Outlook.

2. Navigate to Control Panel / Internet Options / Security tab.

3. Select the Internet security zone.

4. Press Custom Level and Press Enabled for the Active Scripting item.

5. Press OK and OK.

by tben

Good Day

For my case, these problems appear randomly on some of my end users station. I am currently avoiding using Word as an email editor to observe if the similar problem occurs.

I attempted to patch office 2003 with SP 1 on the users affected as well

I post the results of my finding over the matter as well

You may find this hotfix interesting to look at
http://support.microsoft.com/default.aspx?scid=kb;en-us;833986&Product=out2003

I posted other office 2003 problems that I am encountering over at techsupportguy.org

http://forums.techguy.org/t252325.html

by ejknight

I too am getting the same error now on every email that I send. Whats up with this? Has anyone found a solution to this problem?
Rhanks

Ed

by lickity40

Although there is a response in this thread that refers to MS-Word as the editor and registration. I am going to check it out tomorrow.

I've searched the Microsoft site and found a couple of things about blank messages but nothing that fits here.

Keep your eye out! We'll get this thing solved one day....

RF

by carkeekc

Has there been any progress in finding a solution to this problem, since the last post??

Thank you,
Charles Carkeek

by tben

Currently, My company just upgraded our exchange server to 2003 and I have not heard any of such complaints since the server migration.

but I am not sure if it is an issue of the exchange server though

regards

by michaelschmidt46

Perhaps it's not as difficult as one would think. Have you tried looking at simple solutions like if the user is using BLANK stationary instead of NONE?

by lickity40

Interesting observation. I am not sure about previous instances of the problem but just yesterday, a user complained that a message she had sent was blank to the receiver. I checked her Sent Folder and found the message was blank. In the attachment field there was a blank.gif.

When I asked her about the stationary, she said she used the blank stationary.

In other instances of this problem, however, I've seen simply an attachment like ivy.gif so it's not always the blank being used.

Thanks for your input!

by ancientmath

While TR said they didn't have the exhange server themselves, they failed to note what the ISP is using. I would wait for that confirmation still.

I actually saw a message (or at least the first two lines of it) from the popup that occurs with Outlook 2003 and then it blanked out...seemingly while i watched it. I immediately went to Outlook to see if the whole message, but it was gone (blank). I used OWA to try to view the message from the exchange server, but it too showed a blank message (but the attachments were there!). I then tried Outlook Express to view the mail via IMAP, but alas also blank.

Here's what i noticed i did differently when i finally experienced the blank email syndrome as myself as the sender...I inadvertently used Rich Text format. Normally i use HTML when sending email with bold, italics, or pictures, but this one time i had decided perhaps HTML wasn't appropriate so i selected Rich Text instead. It was when the email came back to me blank as well that i realized something gone terribly wrong.

It's not the background (i saw it when i drafted it, i should see it when i read it).

I want to suspect the conversion process somewhere, but i'm unsure just when that happens, at the server for Exchange clients?

by dmarcus

I read through this entire thread and no one has mentioned attempting to reply to or forward one of the blank e-mails in question.

I came across this issue a year or two ago, and it's just raised its head again in a totally different environment. My experience has been that when this happens, if you reply or forward the "blank" e-mail, the original body appears correctly in the reply/forward.

Case in point:
I have a 4-week-old Exchange 2003 server installation, in an office with all Windows XP, Office 2003 workstations. From home I logged on to OWA, opened a new e-mail, and pasted HTML text copied from a webpage (a news article), and sent it to a co-worker whose account is on the same server. The e-mail arrived blank, as everyone in this thread has described. No stationary was used, no extra formatting, no text boxes or tables, and no attachments were included.

The e-mail arrived blank. It's in my Sent Items as blank. But replying or forwarding on either the received e-mail, or the sent e-mail, displays the entire original contents without issue.

Does this give us any further clues???

David Marcus
DMarcus@FHMInc.com

by dwb

The problem started yesterday (2/7/05) on one machine running XP and OE2003, not Exchange. Messages from various sources through different ISP's, all have blank contents.

Second machine running OE2003 under W2k does not have the problem.

One ISP uses Spam Assassin to filter email, checked one blank message against an earlier massage from same source: identical SA results, but the earlier message was delivered, the recent one blank.

In one case OE seems to have downloading partial header info, in other cases the full header info was read but no content.

Running NOD32, IMON settings don't indicate problems. SpywareGuard active/inactive, no diff.

Seems clear that problem is related to the XP/OE 2003 combo, but can't find anything useful on MS sites.

So: anyone resolved this?

TIA

Wayne Babineau

by mca

My config is Exchange 2003 on a SBS 2003 server. Run XP/PRO and WIN2K clients. All was well on the XP machines but the Win2K unit with Office 2003 had the blank message problem. I switched to non-cached mode and all was well. Switched back and the problem returned. I searched high and low assuming that this was part of the problem. After seeing these posts I disabled PGP and everything was AOK. Odd to put it mildly.

by mooky8d

OK, I was about to have a heart-attack when my 7 year long Outlook archive file had EVERY message with no content in the body. THANK YOU for posting the info about disabling the PGP plug in. I was using Network Associates free PGP plug in and once I disabled the plug-in (Tools, Options, Other, Advanced Options, Add-In Manager, Uncheck PGP...) and restarted Outlook I leaped for joy.

Cheers.

Oh, running Office 2003 Pro SP1 on WinXP SP2 with Exchange 2000 SP3 server.

This discussion is closed to new replies.