Question Locked

Branch office VPN

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are currently connecting Neoware thin clients to Windows 2003 Terminal servers. Our firewall is an ISA 2000 Server with the Terminal servers published. We have a branch office that is setup with 3 thin clients connecting via RDP session to the published Terminal servers. We have no VPN setup, only a router and cable modem. We would like to get a networked copier at our remote location but it will not work the way we have it set up. Do we need some type of VPN or PC at the remote location? We would like to stick with all thin clients. Thanks

2 replies

by ozzyjr

An easy solution would be: If network printer is on the Cable Modem side; You could check for a possible NAT/PAT option on modem (cable modems usually suck about such options!) which help you connect your network printers' ip address with your cable modem connections internet address(only for necessary ports that ll make you use a printer). Then you can connect to the printer by using your branch offices internet ip.
If you need a VPN connection about security purposes either then you can locate a VPN server to the branch office side (neednt to be a porsche) and take a look at "routing and remote access" about making a microsoft VPN connection.
Hope is helpfull...

This discussion is closed to new replies.