Question Locked

Bridging a Cisco 501?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

is it possible to bridge a Cisco 501?
Parent company need to set up a printer at another location which has a Cisco 501 router. The MIS manager at the parent company that was told that 501 can not be bridged however some other people have told him it could be. if it could be bridge can someone help out by explaining how it can be done?

Thanks,

2 replies

by flycaster

The Cisco PIX 501 ( i pressume ) is a security devices that controls access from an external (evil) network to an internal (secure) network.

Bridging such a device is not an option.

If i understand the question correctly, you connect two offices with an unsecure network in between and want to print on the remote location or vice versa.

If this is the case you can configure a VPN tunnel to make a secure channel between both offices and print via the tunnel.
A cisco PIX 501 is capable of doing this (you need two).
It makes a "bridge" between two offices over an unsafe area (water,internet or the galaxy).

Good luck.

This discussion is closed to new replies.