Question Locked

Brightstor Arcserve

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently rebuilt a server that was running Windows 2000 to Windows 2003 running Brightstor Arcserve 9.0 build 2200. Attempting to run either a manual or scheduled job the job actully runs for about 10 minutes and I can watch files being backed up to the tape, but then the job always fails and is then put on hold. Job log shows the following message.

Type Date Job Session Message
----------------------------------------------------------------------------------------------------
Information 2007/10/26 10:28:05 28 Run Backup Job Now.
Information 2007/10/26 10:28:05 28 Start Backup Operation. (QUEUE=1, JOB=3)
Information 2007/10/26 10:28:16 28 Use media TEST, ID 1C1D, sequence #1
Information 2007/10/26 10:28:32 28 1 Source Directory: \\MILLER\Users
Information 2007/10/26 10:28:32 28 1 Backup Session 1 on Media TEST
Information 2007/10/26 10:28:32 28 1 Backed up volume disk quota.

4 replies

by dumphrey

some similar problems with BackUp-Exec. It turns out I had misconfigured my media, and it was pausing for me to load the next "tape" which I was not doing, since I was backing up to a "virtual" tape (ie file on a hard drive.) Double check your backup media settings, permissions job is running under, and see if there is a more detailed job log. There should be.

by miker23

The problem appears to be unique to Windows 2003. Under c:\program files\ca\Brightstor Arcserve Backup there is a file called ASRBCKUP.dll. If you stop all of the Brightstor services and rename the file to ASRBCKUP.old and restart the services and then start Brightstor the backup job should run ok.

by dumphrey

to know. Thanks for the update, and glad you solved your problem =)

This discussion is closed to new replies.