Question Locked

Building a firewall machine

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a bunch of questions:

Do I need to run anything like Sygate on my desktop if I build a firewall box?

Does a firewall running on a machine enable me to disallow certain applications from accessing the internet and remote machines etc? Much in the way Sygate says, "Application X is trying to contact a remote machine at 222.222.222.222. Would you like to allow this application to access the internet?"

How is something like that implemented in a firewall machine? If it isn't, what solutions are there for such a problem?

I have a desktop pc with the modem connected to it, and the router coming from that modem. I have two laptops that are used throughout the house wirelessly. Right now I have Sygate on all three machines...is building a firewall from a computer a solution that will enable me to remove the firewall software from each machine?

How many NIC cards will I need? One for the router to plug into and one to send data back out to the desktop? Or is it simply...Modem into firewall...firewall into router? How does one send traffic out of the machine and back into the router to allow the laptops to get on the web? Is that stuff handled by the actual firewall software installed on the old machine I'm converting?

5 replies

by soxtrot

Just wondering if I posted this in the wrong place...

by absolutely

"Questions" is right.

"Discussions" would have been wrong. You didn't post your Question there, so you're right.

by anuragmani88

proxy server runable firewall project report that will run on a LAN and that's work is to filter all the packets from a given IP addresss.

by absolutely

[i]Does a firewall running on a machine enable me to disallow certain applications from accessing the internet and remote machines etc? Much in the way Sygate says, "Application X is trying to contact a remote machine at 222.222.222.222. Would you like to allow this application to access the internet?"[/i]

That isn't duplicated on any standalone firewall I know. And (I'm not totally sure but) I think Sygate gets the information for its popup message from the method that requests the operating system to lend it the network card; that information is not sent on the data packets to the next machine, so that feature could not be duplicated.

[i]...is building a firewall from a computer a solution that will enable me to remove the firewall software from each machine?[/i]

If your goal is to save money, you'll spend less time shopping for a cheaper program. If you decide to build a standalone firewall -- the right way -- expect it to take a lot of time, mostly in research.

[i]How many NIC cards will I need? One for the router to plug into and one to send data back out to the desktop? Or is it simply...Modem into firewall...firewall into router?[/i]

That can work.

[i]How does one send traffic out of the machine and back into the router to allow the laptops to get on the web? Is that stuff handled by the actual firewall software installed on the old machine I'm converting?[/i]

That varies. See above comment about time & research.

This discussion is closed to new replies.