Discussion Locked

Can anyone offer any help on this one

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently inherited a company who runs a bunch of IBM Netfinity Servers which are getting fairly old now but are still more than capable of performing their required functions.

But of course IBM no longer has any info on these products and as they want them upgraded to the Dual Processors that they are capable of running as well as more RAM I'm wondering what is required to make the Dual Processor option work. Just plugging a known good CPU doesn't work and while they required "Registered RAM" could any one tell me just how big a SD RAM can be installed on the Board?

Thanking you in anticipation of your many answers.

Col

6 replies

by pgm554

Go out to their site with the model numbers.
From my experience as a tech and a VAR, what you will find that it is cheaper to buy a newer ,faster and more up to date box than it is to upgrade piecemeal.

The reason you can not just "plug" in another processor is that they sell propritery kits for $$$.
Most systems will not go past 4 GB of ram.

Remember this ,a 3.ghz processor is faster then 2 1.5 ghz processors(overhead of the OS for the 2nd CPU).
It isn't until you you get to 4 or more that SMP begins shine.And if the programs you run don't take advantage of SMP ,it's a waste.

by hal 9000

But they have 34 of the beasts so replacing them isn't an option I'll have to stick with upgrading as possible.

Col

by ehbeitz

Go to Crucial. You will need accurate data on model numbers etc.

Usually both processors have to be changed - they have to be a matched pair. Crucial should be able to answer questions on the memory - but the CPUs you should be able to get anywhere.

What model are your Netfinity Servers?

by hal 9000

There Netfinity's 5000 running P11 400's and 128 MEG of SDRAM mostly 2 X 64 MEG sticks but there is the occasional 128 MEG stick I suppose it was expensive when these units where originally built.

They are all 8559's and as usual for IBM industrial stuff very well made nice to work with and easy to handle and in all likely hood exorbitantly expensive when new so that is why there are still in service as they are still a viable option from a Taxation point of view.

In all honestly I think they could just leave them alone and things would go on without any problems but for some reason most likely Tax related they want to spend the money and make them all faster than they currently are.

But after some of the junk I've had to work with lately these are a pleasure.

Col

by hal 9000

Currently I'm waiting for the book to come from IBM as they insist on charging for it. But in the meantime I've ordered so many sticks of 512 SDRAM that everyone will have 2 GIG when they arrive. Now all I have to do is up the CPU's speed and they will be good for another 6 - 8 years.

Col

This discussion is closed to new replies.