Discussion Locked

Can not access server after window rep

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I experienced a memory ref error and rebooting every time I logged onto our windows 2000 server, after various troubleshooting I ran the repair from the Cd and was able to get back into the server but now I can not access any of the mapped drives on the server from other PCs on the network and the remote access service will not start up, thus you can not access the server using remote access either.
Any suggestions??

Thanks for any suggestions

2 replies

by bfilmfan

What errors are appearing in the server's event log and the workstation's event logs?

by smears

I am not at the server now, I am at a different building but according to my notes, this is what it had:
Error on server:
1)Upon login it says one service did not start
2)The routing and remote access service will not start the message says when you try to manually start it: Could not start the routing and remote access service on local computer, the service did not return an error, it could be an internal windows error or an internal service error.
The event view has the following errors:
Event id 20151
Control protocol PPP and the Point to point
c:/winnt/system32/rasppp.dll returns an error while initizing, the network request is not supported.
Event id 20071
Point to Point protocol module c:/winnt/system3/rastls.dll returned an error while initilizing
Error on client I get when trying to access a mapped drive: network connection is unavailable
When try and use Remote desktop: can not connect to the remote computer, the remote computer might not be unabled or too busy to accept new connections

This discussion is closed to new replies.