Discussion Locked

Can you use .0 in an ip address.. like..

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

###.###.###.0

Is that assigned to something specific or can it be used...

7 replies

by rob1150

I disagree. Lets say that the ip address in question here is 64.15.51.0 with a subnet mask of 255.255.255.0. The "zero" at the end of the ip address would represent the "Network". then you would start with 64.15.51.1 which would be the first computer on the network. and so forth. 64.15.51.255 would represent a broadcast, but you cannot have a zero as the last digit.

by timwalsh

A "0" can (usually) not be used as a node address. It usually designates a network address (if you read the link provided by Max, although the wording is a little confusing, it essentially says this same thing). Node addresses are almost always a number between 1 and 254 inclusive (0 (again) is the network address and 255 is the broadcast address)

by rabbit_runner

I agree with Max. The "0" can be used, but the net mask must be different from the standard class A B or C addresses. Here is an example.
Network = 192.168.4.0
Broadcast = 192.168.7.255
Net Mask = 255.255.252.0

In this case 192.168.5.0 would be a legal IP address. So would 192.168.6.0 and 192.168.7.0
However 192.168.4.0 Would NOT be legal.

Hope this helps.

This discussion is closed to new replies.