4 replies
by mike.monts Accepted solution
by rob miners Accepted solution
Log on as Administrator on the PC that you want to add the account to.
Right click on My Computer and select Manage.
Navigate to Local users and Groups and open Groups.
Double left click on Administrator and select Add.
Type in the User Account name and select Check Names.
The name should appear.
Click OK. Click Apply and OK again.
You will have to do this to each PC that you want the User to have Local Access to.
by mike.monts Accepted solution
by rob miners Accepted solution
OK so you are logged onto the PC with an Administrative Domain Account with authority to add Workstations and Users.
Under Computer Name you are connected to the Domain and not a Workgroup.
At a Command Prompt type in: net view
what do you see
:Ipconfig /all
what do you see
Is DNS, DHCP or Static IP and Gateway all pointing to the right settings.
What Service Pack is on this PC.
Cannot Use Network Identification Wizard to Add Domain User to Local Administrators Group
http://support.microsoft.com/kb/817584
CAUSE
This problem may occur when the domain user's account information has not yet been replicated to the domain controller for the Local Administrators Group that you are trying to add the domain user to.
Try adding the user DomainName\Username
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending