Question Locked

Cannot connect to my local domain

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm new in this Corporation and the guy that was before me installed Windows 2003 server for their server. I have one new pc Dell using Win XP service pack 3 and cannot connect to our local domain when trying to connect. Please I need help on this. Cheers.

10 replies

by seanferd

and assign permissions.

On the local PC, check My Computer > properties > Computer name > Change.

Make sure it is set to 'member of domain", with the proper domain name.

And/or click Network ID and follow the setup.

by tm.oeraang

Thanks but still not working I've already followed that network id but still doesn't work for me. The pop up keeps on saying that "A domain controller for the domain kic.... could not be contracted. Okay here what is happening. When the server boots up after the power failure, it says that the DNS server log file is full and needed to clear off. So I went to run > eventvwr > DNS server > Action menu > then All Events and then click on no. Is it possible that that may be the cause?

Cheers

by rob miners

Go to the workstation and logon as the Local Administrator, in Control Panel, select the Network Connections, Local Area Connection, right click and select Properties, select Internet Protocol and Properties, Tick Obtain an IP address automatically and the same for Obtain DNS server address automatically. Or if you are using a Static IP Address enter the appropriate information.
In Control Panel, select the System icon: Select the tab : "Computer Name" To rename this computer or join a domain click change.
Type in your Domain Name a box will appear asking for a Username and Password Type in the username and password for the new account that has permission to add a PC to the Domain.

Keep us informed as to your progress if you require further assistance. ;) :D

by rob miners

The pop up keeps on saying that "A domain controller for the domain kic.... could not be contracted.

When you enter the Domain name try these substituting your Domain name.

domain
domain.com
domain.local

You can save the DNS log file and then clear all events.

by tm.oeraang

Thanks Howe, I have already tried that too and still comes up with "A domain controller for the domain (domain name) could not be contracted."

An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain (domain name)

" No DNS Server configured for local system." (error code 0x0000267C DNS_ERROR_NO_DNS_SERVERS) The query was for the SRV record for _ldap_tcp.dc._msdc.kic.org.ki

how to I fix this?

by rob miners

against another from a working System that is connecting to the domain.

Check that you are physically connected by rechecking cables, switches etc....

by seanferd

check the local HOSTS file.

Do an nslookup on to the DNS server.
If you use a FQDN, don't forget the trailing dot.

You can try nslookup with no args.

Or nslookup your.domain. (DNS srv IP)

by james.brown

If your DHCP is done through a router and not on the server you need to setup the router to have one of the DNS Servers set as your Domain Server IP. This should allow you to connect/join the domain.

by tardcart

Check the forward lookup zone on your DNS server and make sure there is a valid Host(A) record, Name Server (NS) record and Start of Authority (SOA) record for your PDC. If you use a reverse lookup zone check it as well, you may have a corrupt or duplicate Pointer (PTR) record.

This discussion is closed to new replies.