Question Locked

Cannot Connect WindowsXP Clients to Windows Small Business Server 2003

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having problems connecting Windows XP clients to a Windows Small Business Server 2003 Premium R2 server. I am adding the SBS server to a network that is already in place (2-applications servers\20-clients) and providing Internet access to all clients (Users do not currently log-in to network, just to local computer). DHCP & DNS is currently handled by a Cisco Router managed by the ISP.

However, when trying to connect the clients to the SBS server via the "ConnectComputer" Wizard, I am getting the following error: "The list of users and computers cannot be found. Before you continue, ensure that the client computer has a wired network connection. Also, if you have a router performing DHCP services on your network, verify that the router is configured to use the computer running Windows SBS as the primary DNS server.....".

My configuration is:

Windows SBS Premium R2
Cisco Router Running DHCP & DNS, NAT translations, Firewall
Presario ML310 with 1 NIC
IP Address: 10.0.1.141
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1 (internal interface on Cisco Router)
Server DNS Settings:
Primary: 10.0.1.141
Secondary: 64.238.96.12
DHCP is disabled on the SBS server
Not using the SBS Firewall
Client Workstation Info:
IP Address: 10.0.1.115
Subnet: 255.255.255.0
Default Gateway: 10.0.1.1

Additional Info:

The SBS is connected to the LAN via switch and not connected directly to the router. I have applied all service packs to clients and server. Any help with this problem would be greatly appreciated.

2 replies

by churdoo

What DNS server(s) is your Cisco handing out to the DHCP clients? The SBS server 10.0.1.141 needs to be the first DNS server.

This discussion is closed to new replies.