Question Locked

Can't boot cloned hard drive

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

System specs: Windows XP sp3 (upgraded from Windows ME) Athlon 64 /512 mg ram. My Hard drive is almost full 32gb of 38.1g. Original disk works perfectly. I have a VERY expensive custom-made database system that I cannot afford to lose. I've cloned my hard drive at least 30 times to 7 or 8 different hard drives (160gb-320gb)and can't get a bootable disk. I've cloned with Acronis, Xxclone and Partition Commander 10 Professional (I lost the key to re-install this one can't find it with Key Finder, SIW, Belarc etc..) When I put the hard drives in an enclosure, everything tests perfectly. No errors and I can use all of the programs, I just can't boot from the clone. I thought that maybe because the file system was FAT32, so I upgraded to NFTS, still no luck. I tried the first "r" in repair on XP disk (Fix MBR/Fix Boot/ Rebuild MBR "Rebuild failed") then the second "r" install says it can't find windows. I've used Bart PE, windows '98 and Millennium boot disks , BootMe, ERD Commander and Partition Commander. I can get into windows with all of these, but they all say that there are no errors. I've toggled the drive letter-unmounted and remounted-to letter C, "corrected" the MBR, used a "Model" MBR ect. with these programs (each time I used a new clone). My boot.ini looks like this:
[boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS = "Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn
I can find this on the clone in the boot.ini backup and "My Documents and Settings", but not in the configuration files. I don't know how to put it there. I've tried changing some of the spacing and switching "fastdetect" and "NoExecute = OptIn" around like in the "Model" boot files to no avail. This is making me crazy!!! I did a clone on an identical system FAT32 (both made by my ex-guru who had a career change) and it cloned fine. The only difference between this one and the one that cloned was this one was originally Windows ME and not XP. I really don't know much about writing boot codes myself. Please help!! Also I lost the key to my Visual Basic 6.0 disk that I need to make the database program work if I use my hard drive in an enclosure on another machine. I saw a Key Finder program that says it finds the key to VB server 2003, but doesn't say if it can find VB 6.0. any suggestions? I'm really sorry that this is so long.

5 replies

by oh smeg

But to begin with if you have 32 Gig used of a possible 38 GIG the Drive is too full to clone to begin with. Actually it's very unlikely to work correctly as well because there [b]Is Not[/b] enough free space left on the Drive. Also you will not be able to run Defrag on this Drive as it doesn't have enough free space.

Start off by backing up your Data to something, ideally a HDD fitted to a USB Enclosure and only used when you are making the backup or restoring from the Backup.

Or install another HDD as a Slave and move the Data from your DBase over there to free up some space.

Please add some breaks to anything you reply to as well. It just makes it easier to read. :)

Col

by polypineer

Thank you for your reply.I'll try it tonight.
It is actually a 40gb HDD. I defragged reciently and had no problem. Any help with lost keys?

by strayer

I cloned a hard drive some time ago.
I suggest you go to the hard drive makers web site. They usually have 'how to' clone.
I downloaded a program to diskette that made the cloned drive bootable.
It wasn't hard to do and it worked.
Without a boot loader on the drive, it won't boot.

by rob miners

Reconnect the drive to the System that you are using to manipulate your drive.

1. Log on as administrator or as a member of the Administrators group.

2. Click Start, click Run, type compmgmt.msc, and then click OK.

3. In the console tree, click Disk Management. The Disk Management window appears. Your disks and volumes appear in the right hand pane of the window.

4. Your drive will show up as Disk 1 and it should say Healthy (Active, Primary Partition)

If it is not displaying this information reconnect the drive to the System that you will be using and follow these steps.

Boot from your XP CD and press the first R to enter the Recovery Console.

At the recovery command prompt type in these commands pressing the Enter key after each one.

diskpart

select disk 0

select partition 1

active

Now type

EXIT to exit the diskpart session

fixmbr

fixboot

bootcfg /rebuild

Restart the PC with the XP CD removed.

Keep us informed as to your progress if you require further assistance. ;) :D

This discussion is closed to new replies.