Discussion Locked

can't get an dynamic ip address

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi there
i am using a wireless conection to connect to the internet , the wireless isp enabled the dhcp server , and it use an mac filter to make sure of ppl who connect to the network , when i am connect to the network i don't get an ip adress i just conect to the netwrok , my mac is valid i am at the network .but i can't recieve packets , i have the dhcp ip the dns the gatway and ip adress , other users get an ip from the netwrok it just my problim i am using windows xp profisional

3 replies

by ryany23

First, and most obvious but I just have to say it, double check all of your network settings for the wireless NIC. Also, try to use a static IP address that is valid on the network. Then try to ping the access point itself, the default gateway, or another machine on the network.

Second, make sure you don't have WEP enabled on the WAP (or if you are wanting to use WEP, make sure you are supplying the correct key). Also double check the ACL for the MAC addresses. Sometimes if you use a SNMP client to edit the MAC ACL on the access point it will miss an entry.

Also, have you been able to connect to this or other wireless networks before with this machine. If not, try reinstalling the NIC with updated drivers.

Hope that helps.

by joseph moore

Yeah, I agree, the network settings must be wrong at the DHCP server.
Connect to the wirless access point, then do IPCONFIG /ALL on the XP box (from the Command Prompt) and make sure everything is what it should be.
Maybe the subnet mask the DHCP server issues your XP box is wrong. That would explain a total network non-communicative thing.

by abbodg

hi
thank u for replying , i tried to

use a static ip and it didn't work

, i want to tell u that i was

conecting to this wireless network

from my pc and every thing was ok ,

now my mac is unregistered to the

network , i have a friend mac

adress i used it to my wireless

card and i loged to the netwrok ,

the problem that i don't recive an

ip adress i tried to ping the acces

point and clients but time over , i

have the acces ip and the dns ip

and all the users mac adresses and

all ip , i loged to the network but

i have no ip how i can configure an

ip to recieve data my wireless card

is lg
i did ipconfig/all and the ip

adress and subnet mask , dhcp

server ,every thing wrong
thank u

This discussion is closed to new replies.