Question Locked

Can't get Win. Vista to recognize external hard drive...

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Have a 500gb external I borrowed from a friend, Vista seems to recognize it as "drivers succesfully installed" and also when plugged in I get the "Safely Remove Hardware" button...the device has its own power (plugged in, don't worry) but I cant find the device anywhere to open it..not in My Computer or anywhere else. I'm pretty computer illiterate, by the way, but anything would help!

9 replies

by Former member

Before Vista can recognise it, or go into "computer management > disk management" to see if it is recognised there.

Please post back if you have any more problems or questions.

by dpdavis00

I went in to "computer management > disk management" and i thiiink it's there, it says Disk 1 has 465.76GB connected through the USB. I still cant seem to find it or access all the files on it that I need...

by the scummy one

does it have a drive letter assigned? If not, r. click on it and choose to assign a driive letter.
If the option is not there it may need formatting first.

by oh smeg

You need to format the Drive destroying the Data that may be on it already because the Drive Format isn't Vista Compatible.

Vista has several differences to the previous M$ OS's and with the added security it proves impossible sometimes to read Drives not Formatted Under Vista. If you really need the data off this drive you'll need to connect it to a XP or some form of Live Linux and transfer the data off the USB Drive onto the Internal Drive.

If you want to download a Live Linux there are several different ones here that will do

http://tinyurl.com/23nmq

While Knoppix is probably the best for your needs there are quite a few to chose from there.

Col

by Member 30634329

My question is how your friend was able to use it and you cannot. Did your friend have it attached to a Mac by any chance?

by dpdavis00

as a matter of fact yes, it was attached to a MAC...does that mean I can't use it without destroying all the data? the whole point of me borrowing it was so I could get the data...

by Member 30634329

Mac's and PC's use file systems that are not compatible with one another.
To enable your Windows PC to read a Mac disk, there are several software programs you can install that will allow this:

http://www.macwindows.com/disks2.html

Allowing the Mac drive to be accessed in Windows is the first step. The next step would be to find out which files you are moving over and whether they can be converted to Windows format. Depending on how often you will be doing this, it may be worth investing in something like DataViz's Conversions Plus:

http://www.dataviz.com/products/conversionsplus/index.html

by rob miners

Scummy's suggestion. :)

Try rebooting the computer without any USB devices attached. Then plug in the USB drive, right click on My Computer, select manage, and then click ?Disk Management.? If the drive is not present in the Disk Management window or if you are not able to access it, then the drive may have failed. In this window you should see all of your connected physical drives, their format, if they are healthy, and the drive letter.
Change the drive letter of the drive. Right-click on the drive in the list, and from the resulting menu select "Change Drive Letters and Paths"
Click on Change so you can change the drive letter. Click Change.
Select a new drive letter from the drop down list, preferably the one that is not normally used for this drive.
Click Yes on the confirmation screen and you are done.

Caution: The cause of unpredictable behavior in a USB drive is often found to be the incorrect removal of a previously connected USB device. When removing USB devices right click on the ?Safely Remove Hardware? icon in the menu bar tray. This is usually found in the bottom right hand corner of the monitor. Once you have clicked on the icon, a menu with a single selection should appear. Click again on that selection to see the ?Safely Remove Hardware? window. Select the correct USB device and click the ?Stop.? When you receive the message that it is safe to remove the device, unplug the USB device from the computer.

This discussion is closed to new replies.